The spillway is an important structure in the dams, used to pass the flood wave to the downstream safely. In the past decades, Computational fluid dynamics (CFD) has evolved. Research findings have shown the CFD models are a great alternative for laboratory models. According to it, the flow pattern over ogee spillways can be studied in a short time and without paying high expenses. Because the flow over the ogee spillway is turbulent and has a free surface, its properties are complex and often difficult to predict. Therefore, the present paper focuses on the study of turbulence closure models including the standard k-ε, RNG k-ε, k-ω, also, the large-eddy simulation (LES) models, to assess their performance to simulate flow over the spillway. The Flow-3d software with the volume-of-fluid (VOF) algorithm is applied to obtain the free surface for each turbulence model. The results of the analysis show that the LES model yielded better results when compared with laboratory results, while the turbulence closure models result of Reynold average Navier Stocks equations (RANS) was more stable, especially standard k-ɛ and RNG models.
In recent years, Iraq suffers from exacerbation of the deficit of electrical energy as well as the great environmental pollution resulting from the use of traditional fuels. This called for serious thought to search for using clean and renewable energy sources may available in Iraq. In the present study; small hydropower (i.e. Archimedes screw turbine) are specifically used with a low head at Ramadi Barrage in Iraq. This type of small hydropower station is suitable to apply because not need high storage water or high head in Barrage. The power production in this technology depends on the parameters of the location in which it is placed such as (length L, angle of inclination α, Diameter D,….).The physical model of the Archimedes screw turbine is applied to determine the optimal α. The solid work package with a combination of Computational Fluid Dynamics (CFD) analysis by ANSYS have been used to simulate numerically a three dimensions model to determine the value of power that could be produced by the Archimedes turbine in the Ramadi Barrage. The turbine's performance are tested on two cases which represent low and high discharge investigations with different α (18⁰, 23⁰, 30⁰, 35⁰) based on different flow conditions and different water head between upstream and downstream of the barrage. The results showed that the maximum power production from the barrage is 280,000 watts with α=35° and efficiency η=89.9% for case 1; while; this power becomes 400,000 watts with α=30° but of efficiency η=84.9% for case 2. It is concluded from this research that power production from Ramadi Barrage could be investment to eliminate the deficit in the electrical energy in Iraq.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.