The paper presents a new coplanar waveguide (CPW)-fed rectangular patch antenna with a square-shaped ground plane that can be employed in modern advanced navigation systems. For realizing broad impedance bandwidth in the proposed antenna, a wide slot is introduced in the square ground plane and the rectangular patch is shifted toward the left edge of the ground surface. In addition, by means of introducing square-shaped stubs near the left and right edge of the ground plane, the circular polarization is achieved at L1, L2, and L5 satellite bands. As per the simulation results, the proposed antenna provides a wide impedance bandwidth (S11<−10 dB) of 123% (1.12–4.72 GHz) and 3 dB axial ratio bandwidth of 11% (1.15–1.29 GHz) and 18% (1.5–1.8 GHz) suitable for multipurpose wireless applications. The designed single feed circularly polarized antenna is low profile, small size, light weight and easily integrable with other high-frequency communication devices. To validate radiation performance of the proposed structure, the antenna is fabricated and integrated with the commercially available Global Positioning System (GPS) receiver and it is found that the measured values are in close agreement with the desired results.

No abstract

A microstrip low pass filter using a U‐shaped folded high impedance line is designed. Comparison with conventional filter has shown almost ripple free pass band and better stop band characteristics in the filter with folded line. Effective optimization of filter dimensions led to smoother and spurious free responses, which are desirable in the radio frequency and microwave systems. Size of overall filter is reduced by 7.5% and 9.02% for third order and fifth order filters, respectively. Both simulated and measured responses of fifth order filter are presented and found in agreement.

The paper presents a new coplanar waveguide (CPW)-fed ultra-wideband (UWB) dual circularly polarized (CP) slot antenna. For realizing UWB, a wide slot is introduced in the ground plane of the proposed antenna. The circular polarization is achieved by introducing a semi-circular stub in the square ground plane. The antenna contains two symmetrical CPW-fed ports at left and right edges to generate dual circular polarization. The evolution steps of the proposed CP antenna are presented, and antenna parameters are optimized to obtain the desired level of isolation, return loss, and axial ratio bandwidth (ARBW). The measured impedance bandwidth (S 11 ≤ −10 dB) of the antenna is 13.5 GHz (2.5-16 GHz); 3-dB ARBW is 75.23% (2.67-5.89 GHz); and isolation greater than 17 dB is obtained in the CP band. The designed dual feed CP antenna has low profile, light weight, compact size, and could be suitable for polarization diversity applications for reducing the effect of multipath fading.

No abstract