No abstract

The issues of global warming and fossil fuel shortage have increased the demand for clean and renewable energy.

A highly efficient VOC sensor based on N-doped graphene quantum dots (N-GQDs)/poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) (PEDOT–PSS) was fabricated at room temperature.

Electrochemical carbon dioxide (CO2) reduction is considered to be an efficient strategy to produce usable fuels and overcome the concerns regarding global warming. For this purpose, an efficient, earth abundant, and a low cost catalyst has to be designed. It has been found that graphene‐based materials could be promising candidates for CO2 conversion because of their unique physical, mechanical, and electronic properties. In addition, the surface of graphene‐based materials can be modified by using different strategies, including doping, defect engineering, producing composite structures, and wrapping shapes. In this review, the fundamentals of electrochemical CO2 reduction and recent progress of graphene‐based catalysts are investigated. Furthermore, recent studies on graphene‐based materials for CO2 reduction are summarized.

Low dimensional transition metal carbide and nitride (MXenes) have been emerging as frontier materials for energy storage and conversion. Ti3C2Tx was the first MXenes that discovered and soon become the most widely investigated among the MXenes family. Interestingly, Ti3C2Tx exhibits ultrahigh catalytic activity towards the hydrogen evolution reaction. In addition, Ti3C2Tx is electronically conductive, and its optical bandgap is tunable in the visible region, making it become one of the most promising candidates for the photocatalytic hydrogen evolution reaction (HER). In this review, we provide comprehensive strategies for the utilization of Ti3C2Tx as a catalyst for improving solar-driven HER, including surface functional groups engineering, structural modification, and cocatalyst coupling. In addition, the reaming obstacle for using these materials in a practical system is evaluated. Finally, the direction for the future development of these materials featuring high photocatalytic activity toward HER is discussed.

No abstract

No abstract

A facile, highly efficient approach to obtain molybdenum trioxide (MoO3)-doped tungsten trioxide (WO3) is reported. An annealing process was used to transform ammonium tetrathiotungstate [(NH4)2WS4] to WO3 in the presence of oxygen. Ammonium tetrathiomolybdate [(NH4)2MoS4] was used as a dopant to improve the film for use in an electrochromic (EC) cell. (NH4)2MoS4 at different concentrations (10, 20, 30, and 40 mM) was added to the (NH4)2WS4 precursor by sonication and the samples were annealed at 500 °C in air. Raman, X-ray diffraction, and X-ray photoelectron spectroscopy measurements confirmed that the (NH4)2WS4 precursor decomposed to WO3 and the (NH4)2MoS4–(NH4)2WS4 precursor was transformed to MoO3-doped WO3 after annealing at 500 °C. It is shown that the MoO3-doped WO3 film is more uniform and porous than pure WO3, confirming the doping quality and the privileges of the proposed method. The optimal MoO3-doped WO3 used as an EC layer exhibited a high coloration efficiency of 128.1 cm2/C, which is larger than that of pure WO3 (74.5 cm2/C). Therefore, MoO3-doped WO3 synthesized by the reported method is a promising candidate for high-efficiency and low-cost smart windows.