MHD Natural convection, which is one of the principal types of convective heat transfer in numerous research of heat exchangers and geothermal energy systems, as well as nanofluids and hybrid nanofluids. This work focuses on the investigation of Natural convective heat transfer evaluation inside a porous triangular cavity filled with silver-magnesium oxide/water hybrid nanofluid [H2O/Ag-MgO]hnf under a consistent magnetic field. The laminar and incompressible nanofluid flow is taken to account while Darcy–Forchheimer model takes account of the advection inertia effect in the porous sheet. Controlled equations of the work have been approached nondimensional and resolved by Galerkin finite element technique. The numerical analyses were carried out by varying the Darcy, Hartmann, and Rayleigh numbers, porosity, and characteristics of solid volume fraction and flow fields. Further, the findings are reported in streamlines, isotherms and Nusselt numbers. For this work, the parametric impact may be categorized into two groups. One of them has an effect on the structural factors such as triangular form and scale on the physical characteristics of the important outputs such as fluidity and thermal transfer rates. The significant findings are the parameters like Rayleigh and slightly supported by Hartmann along with Darcy number, minimally assists by solid-particle size and rotating factor as clockwise assists the cooler flow at the center and anticlockwise direction assists the warmer flow. Clear raise in heat transporting rate can be obtained for increasing solid-particle size.
Heat transfer in a symmetrical cavity with two semi-cylinders was explored in this study. Several parameters, such as (103≤Ra≤106), (10−5≤Da≤10−2), (0.02≤ϕ≤0.08), (0.2≤ε≤0.8), and (0≤Ha≤100) were selected and evaluated in this research. The outcome of the magnetic field and the temperature gradient on the nanofluid flow is considered. The geometric model is therefore described using a symmetry technique. The flow issue for the governing equations has been solved using the Galerkin finite element method (G-FEM), and these solutions are presented in dimensionless form. The equations for energy, motion, and continuity were solved using the application of the COMSOL Multiphysics® software computer package. According to the results, there is a difference in the occurrence of the magnetic parameter and an increase in heat transmission when the right wall is recessed inward. The heat transmission is also significantly reduced when the right wall is exposed to the outside. The number of Nusselt grows directly proportional to the number of nanofluids in the environment. In contrast, all porous media with low Darcy and Hartmann numbers, high porosity, and low volume fraction have high Nusselt numbers. It is found that double streamlines for the hot side and single cooling for Darcy, Rayleigh, and Hartmann numbers. A cold isotherm at various physical parameters is needed in the top cavity. Rayleigh’s number and a solid volume fraction raise Darcy’s number, increasing heat transmission inside the cavity and thermal entropy determines entropy components.
The convection and entropy of a hybrid nanofluid were investigated in a cylindrical chamber. Inside the cylinder, we have added a rectangular fin with a temperature of Th. Tc applied on the right waving wall. Insulation installed on both the top and bottom walls. The induction of a
steady magnetic field is included in this research. Governing equations are resolved by Galerkin finite element method (GFEM) and it’s utilized to treat the controlling equations obtained by giving different characteristics of fluid like The porosity, cylinder rayon and the size of the
nano particles with Rayleigh, Hartmann and Darcy numbers. This information is crucial for controlling both fluid flow and the heat transfer rate for normal convection. The results of the solution demonstrate that Da influences the entropy and leads to a decrease in the generation of entropy.
The Nusselt mean differs in a straight line with the dynamic. The domain of flows through the sublime modes while it acts contrary with the magnetic force. The use of a rectangular fin inside a cylindrical enclosure rather than traditional ones, as well as the evaluation of its optimal dimensions,
was novel in this paper. Moreover, the novelty of this study is that it fills a research gap by looking into the effect of the specific shape of the walls of the porous chamber on heat flux.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.