Type 304 austenitic stainless steel, or better known as SS304, generally has alloying elements: C < 0.1%, Cr 18 – 20%, Fe 66 – 74%, Mn <2%, Ni 8 – 10.5%, P <0.045%, Si <1%, and S <0.030%. In general, this material has good ductility, high tensile strength, and excellent corrosion resistance. In application, type SS304 will be subjected to repeated loading, and eventually, the material will undergo plastic deformation, which leads to structural failure in a short life. The failure of SS304 is generally due to the inability of the material to repeat loading, which results in large amounts of plastic deformation so that the SS304 will experience fatigue and then fracture. Based on the description above, this study aims to evaluate the LCF properties of 304 CDS stainless steel with annealing heat treatment. The parameter used was the strain amplitude 0.003 – 0.013 mm/mm. The results of this study revealed that the highest fatigue life in the LCF test was experienced by steel with heat treatment at an amplitude of 0.003 mm/mm with 48367 cycles. In contrast, at the amplitude condition of 0.013 mm/mm, the fatigue life of the steel decreased drastically with the resulting plastic strain being larger, namely 0.0094 mm/mm and elastic strain of 0.0035 mm/mm, with an average modulus of elasticity of 194 GPa. Annealing treatment conditions experienced decreased mechanical strength but tended to be ductile. Using Basquin-Coffin-Manson Equation, empirical equations to predict LCF of 304 stainless steels can be determined.
Tujuan dari pengabdian ini adalah untuk membimbing mitra industri dalam perancangan dan pembuatan mesin cetak batako dan paving menggunakan metode getar. Pengabdian ini dilaksanakan di kelurahan Rajabasa Jaya, Kecamatan Rajabasa, Kota Bandar Lampung. Tahapan pelaksanaan pada pengabdian ini adalah 1) Survei dan studi literatur; 2) Persiapan tim dalam melaksanakan kegiatan; 3) Bimbingan teknis perancangan dan pembuatan mesin, dan 4) pengujian mesin pencetak batako/paving. Pada pengabdian ini yang menjadi subjek kegiatan merupakan warga dari Kelurahan Rajabasa Jaya, Bandar Lampung. Pengabdian ini dilakukan pada November 2022. Hasil yang diperoleh adalah mitra memahami teknis perancangan dan pembuatan mesin cetak batako dan paving dengan metode getar. Mesin yang sudah dirancang dan dibuat mampu mencetak batako dan paving dengan lebih cepat dan efisien, sehingga mampu menghemat waktu pembuatannya dan memproduksi lebih banyak batako dan paving dibandingkan metode manual.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.