Optimal planning of integration the Photovoltage Distributed Generation (PV-DG) and DSTATCOM is a crucial task due to the stochastic variations of PV output power and the load demand which are related to solar irradiance variations and the activities of the customers, respectively. In this article, the optimal planning problem of the PV-DG and DSTATCOM system is solved. The proposed model considers the uncertainties of the solar irradiance and the load demand for a multi-objective function, including the cost reduction, the voltage profile, and stability index improvement. Modified Ant Lion Optimizer (MALO) is proposed to enhance the basic ALO searching ability using two strategies. The first strategy is based on Levy Flight Distribution (LFD) to strengthen the exploration of the algorithm and avoid the premature of the basic ALO. In contrast, the second strategy is based on updating the solutions in a spiral orientation to improve the exploitation of the algorithm. The IEEE 69-bus and 118-bus radial distribution systems are used to demonstrate the effectiveness of the proposed method, and the yielded simulations are compared with the basic ALO and other well-known optimization techniques for power loss minimization under deterministic conditions. The simulation results demonstrate that the techno-economic benefits can be increased considerably by optimal inclusion of two PV-DGs and DSTATCOMs compared with a single system.

Nowadays, the trend of countries and their electrical sectors moves towards the inclusion of renewable distributed generators (RDGs) to diminish the use of the fossil fuel based DGs. The solar photovoltaic-based DG (PV-DG) is widely used as a clean and sustainable energy resource. Determining the best placements and ratings of the PV-DG is a significant task for the electrical systems to assess the PV-DG potentials. With the capability of the PV-DG inverters to inject the required reactive power in to the system during the night period or during cloudy weather adds the static compensation (STATCOM) functionality to the PV unit, which is being known as distributed static compensator (DSTATCOM). In the literature, there is a research gap relating the optimal allocation of the PV-DGs along with the seasonal variation of the solar irradiance. Therefore, the aim of this paper is to determine the optimal allocation and sizing of the PV-DGs along with the optimal injected reactive power by their inverters. An efficient optimization technique called Gorilla troop’s optimizer (GTO) is used to solve the optimal allocation problem of the PV-DGs with DSTATCOM functionality on a 94 bus distribution network. Three objective functions are used as a multi-objective function, including the total annual cost, the system voltage deviations, and the system stability. The simulation results show that integration of PV-DGs with the DSTATCOM functionality show the superiorities of reducing the total system cost and considerably enhancing system performance in voltages deviations and system stability compared to inclusion of the PV-DGs without the DSTATCOM functionality. The optimal integration of the PV-DGs with DSTATCOM functionality can reduce the total cost and the voltage deviations by 15.05% and 77.05%, respectively. While the total voltage stability is enhanced by 25.43% compared to the base case.

No abstract

The aim of this paper to assess the optimal site and size of photovoltaic (PV) generation-based DG along with Distribution Static Synchronous Compensator (DSTATCOM) in the real distribution network East Delta Network (EDN). In this paper, a new optimization method called Slime Mold Algorithm (SMA) simulates the oscillation mode of a slime mold in nature. DSTATCOMs and PV modules are applied to reduce losses, voltage profile and enhance stability while meeting the limitations of equality and inequality in the system. Evaluation is provided with only PV modules installed, DSTATCOMs installed only and PV modules installed with DSTATCOM. The simulations verified that the optimization of PV modules combined with DSTATCOMs can significantly enhance system performance compared to PV only modules or DSTATCOMs and the effectiveness of the proposed algorithm for allocating PVs and DSTATCOMs in terms of objective functions.

Summary This paper addresses the allocation of a hybrid system that includes PV‐DG and DSTATCOM. The planning problem considers the variations of load demand and solar irradiance under deterministic and probabilistic conditions. An efficient optimization algorithm called MPA is implemented to assign the optimal placement and ratings of the hybrid PV‐DG and DSTATCOM. The considered objective function is a multi‐objective function that includes the annual cost reduction, improvement of voltage profiles, and system stability improvement. The assessment is accomplished with the inclusion of a single and two‐hybrid system on a large 94‐bus system. For validating the effectiveness of the MPA, the yielded results are compared with the PSO, which is considered a commonly used algorithm. In deterministic conditions, the hourly variations of the load demand and solar radiation are considered in four yearly seasons, while in probabilistic conditions, 3 years of hourly historical data of solar irradiance and load demand are utilized to describe the uncertainties of the load demand and solar irradiance. The simulation results demonstrate that the optimal inclusion of a single‐hybrid PV‐DG and DSTATCOM system can enhance the system's technical performance (the voltage profile, the voltage stability) and enhance the economic scheme (total annual cost reduction). In addition, the inclusion of two‐hybrid systems is superior compared with the inclusion of a single‐hybrid system in terms of the considered objective functions, as well as the proposed technique is more efficient for solving the allocation problem of the hybrid system.