When immediate bonding to bleached enamel is to be implemented, organic-solvent based adhesives are not capable of eliminating or reducing the adverse effect of bleaching systems on bond strength. AK Nour El-din • BH MillerJA Griggs • C Wakefield SUMMARYThis research sought to determine the shear bond strength, degree of resin infiltration and failure mode when organic solvent-based adhesives (acetone or ethanol) were used in immediate bonding to enamel bleached with 10% carbamide peroxide or 38% hydrogen peroxide systems. Seventy-two non-carious bovine incisors were randomly assigned to three groups of 24 specimens each-control group (deionized water), 38% hydrogen peroxide bleach group and 10% carbamide peroxide bleach group. Each group was further subdivided into two subgroups of 12 specimens each according to the adhesive system used to bond the resin composite to enamel surfaces. The two adhesive systems used were Single Bond, an ethanol-based adhesive, and OneStep, an acetone-based adhesive. The shear bond strengths of 38% hydrogen peroxide and 10% carbamide peroxide were significantly lower compared to the non-bleached controls. Fractography revealed an adhesive failure mode in all specimens. Qualitative comparisons of resin tags present in the bleached and unbleached specimens using scanning electron microscopy (SEM) revealed few, thin and fragmented resin tags when 38% hydrogen peroxide and 10% carbamide peroxide were used.