Herein, we examine the impact of cations on the structural, morphological, optical properties and degradation of lead perovskite APbI3 (where A = MA, FA, Cs). Its structure, surface morphology and optical properties have been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-Visible spectrometer. The structure of perovskite thin films was found to be in the direction of (110) plane. It is seen from the XRD results that this kind of cation assumes a significant part in stabilising and improving the performance of APbI3 based solar cells. Here, the cesium lead iodide thin films show a smooth and homogenous surface and enormous grain size without pinhole perovskite film. An optical investigation uncovered that the band gap is in a range from 1.4 to 1.8 eV for the different cations. Additionally, in ~60% humidity under dark conditions for two weeks, the structural and optical properties of CsPbI3 films remained good. Furthermore, the efficiency of FTO/TIO2/CSPbI3/Spiro-Ometad/Au solar cells was calculated to be 21.48%.
Antisolvent quenching has shown to significantly enhance several perovskite films used in solar cells; however, no studies have been conducted on its impact on MASnI3. Here, we investigated the role that different antisolvents, i.e., diethyl ether, toluene, and chlorobenzene, have on the growth of MASnI3 films. The crystallinity, morphology, topography, and optical properties of the obtained thin films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) measurements, and UV–visible spectroscopy. The impact of the different antisolvent treatments was evaluated based on the surface homogeneity as well as the structure of the MASnI3 thin films. In addition, thermal annealing was optimized to control the crystallization process. The applied antisolvent was modified to better manage the supersaturation process. The obtained results support the use of chlorobenzene and toluene to reduce pinholes and increase the grain size. Toluene was found to further improve the morphology and stability of thin films, as it showed less degradation after four weeks under dark with 60% humidity. Furthermore, we performed a simulation using SCAPS-1D software to observe the effect of these antisolvents on the performance of MASnI3-based solar cells. We also produced the device FTO/TiO2/MASnI3/Spiro-OMeTAD/Au, obtaining a remarkable photoconversion efficiency (PCE) improvement of 5.11% when using the MASnI3 device treated with chlorobenzene. A PCE improvement of 9.44% was obtained for the MASnI3 device treated with toluene, which also showed better stability. Our results support antisolvent quenching as a reproducible method to improve perovskite devices under ambient conditions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.