No abstract

Utilization of nanotechnologies in condensation has been recognized as one opportunity to improve the efficiency of large-scale thermal power and desalination systems. High-performance and stable dropwise condensation in widely-used copper heat exchangers is appealing for energy and water industries. In this work, a scalable and low-cost nanofabrication approach was developed to fabricate superhydrophobic copper oxide (CuO) nanoneedle surfaces to promote dropwise condensation and even jumping-droplet condensation. By conducting systematic surface characterization and in situ environmental scanning electron microscope (ESEM) condensation experiments, we were able to probe the microscopic formation physics of droplets on irregular nanostructured surfaces. At the early stages of condensation process, the interfacial surface tensions at the edge of CuO nanoneedles were found to influence both the local energy barriers for microdroplet growth and the advancing contact angles when droplets undergo depinning. Local surface roughness also has a significant impact on the volume of the condensate within the nanostructures and overall heat transfer from the vapor to substrate. Both our theoretical analysis and in situ ESEM experiments have revealed that the liquid condensate within the nanostructures determines the amount of the work of adhesion and kinetic energy associated with droplet coalescence and jumping. Local and global droplet growth models were also proposed to predict how the microdroplet morphology within nanostructures affects the heat transfer performance of early-stage condensation. Our quantitative analysis of microdroplet formation and growth within irregular nanostructures provides the insight to guide the anodization-based nanofabrication for enhancing dropwise and jumping-droplet condensation performance.

No abstract

No abstract

No abstract

No abstract

 and ‡ These authors contributed equally to this work.We demonstrate that blending fluorinated molecules in PEDOT:PSS hole transport layers (HTL) induces charge transfers which impact on both charge extraction and photogeneration within organic photovoltaic (OPV) devices. OPVs fabricated with modified HTL and two photoactive polymer blends led systematically to power conversion efficiencies (PCE) increases, with PTB7:PC70BM blend exhibiting PCE of ~ 8.3 %, i.e. ~ 15 % increase compared to pristine HTL devices. A reduced device-to-device characteristics variations was also noticed when fluorinated additives were used to modify the PEDOT:PSS. Shading lights onto the effect of HTL fluorination, we show that the morphology of the polymer:PCBM blends remains surprisingly unaffected by the fluorinated HTL surface energy but that, instead, the OPVs are impacted not only by the HTL electronic properties (work function, dipole layer, open circuit voltage, charge transfer dynamic) but also by alteration of the complex refractive indices (photogeneration, short circuit current density, external quantum efficiencies, electro-optic modelling). Both mechanisms find their origin in fluorination induced charge transfers. This work points towards fluorination as a promising strategy toward combining both external quantum efficiency modulation and power conversion efficiency enhancement in OPVs. Charge transfers could also be used more broadly to tune the optical constants and electric field distribution, as well as to reduce interfacial charge recombinations within OPVs. [21][22][23][24][25][26][27][28][29]

The electrical and memory behavior of organic bistable memory devices in the form of metal-embedded insulator-metal (MIM) structure are described. The devices utilize layer-by-layer (LbL) deposited single walled carbon nanotubes (SWCNTs) as charge traps embedded between two polymethylmethacrylate (PMMA) insulating layers. The stack was sandwiched between two aluminium electrodes to form an Al/PMMA/SWCNTs/PMMA/Al structure. The current-voltage (I-V) characteristics of the devices exhibit electrical bistability and non-volatile memory characteristics in terms of switching between high conductive (ON) and low conductive (OFF) states. The different conductive states were programmed by application of a positive and negative voltage pulse for the ON and OFF states, respectively. A maximum ON/OFF ratio of 2 × 105 is achieved at low reading voltage of 1 V. Space-charge-limited-current (SCLC) conduction model was used to describe the carriers transport and the electrical bistability in the devices, which was attributed to the trapping and detrapping of electrons inside the SWCNTs.