IntroductionComputer-aided design (CAD) and computer-aided manufacturing (CAM) monolithic crowns are gaining momentum. Limited evidence exists about the effect of tooth preparation total occlusal convergence (TOC) on marginal and internal gap distances in addition to load to fracture values.AimThe aim of this study was to evaluate, by microcomputed tomography (µCT), the influence of 12° and 20° TOC on marginal and internal adaptation of zirconia-reinforced lithium silicate (ZLS) crowns. Moreover, values of load to fracture with and without initial cyclic loading (CL) were compared.Material and methodsForty ZLS crowns were fabricated on dies with TOC of 12° and 20°, 20 crowns for each group. µCT was used to compare marginal and internal adaptation. Each specimen was measured at 140 points distributed on all tooth preparation surfaces for 2D gap distance assessment. 3D gap volume was also evaluated. Crowns were then cemented and divided into two subgroups; the first was stored in distilled water (no cyclic loading [NCL] subgroup), the second was subjected to CL (CL subgroup).ResultsFactorial repeated measures ANOVA followed by Bonferroni post hoc in addition to independent and dependent t-tests were used for statistical analysis. Marginal gap, absolute marginal discrepancy, and occlusal gap measurements showed significant differences between the measurement sites. Static load to fracture values showed significant differences between TOC groups for both NCL (P=0.011) and CL (P=0.025) subgroups.ConclusionAn increase of TOC from 12° to 20° did not affect marginal and internal adaptation but resulted in higher values of load to fracture of ZLS crowns. CL simulating 1 year of service did not result in fatigue failure.

No abstract

No abstract

Background The Golden Proportion (GP) has been considered by many as the most harmonious recurrent tooth-to-tooth ratio and has long been proposed as an aesthetic guideline for restoring/replacing maxillary anterior teeth. Researchers investigated GP in various populations. Purpose The aim of the current study was to investigate the occurrence and prevalence of the GP between the perceived widths of maxillary anterior teeth in a Saudi population with natural smiles. Materials and Methods A total of 360 Saudi dental students (180 males and 180 females) with natural smiles and who met the inclusion criteria were included in the study. Frontal photographs were captured for all participants while maximally smiling using a digital camera with standardized settings. Photo-editing software was used to measure the perceived mesiodistal width of each anterior maxillary tooth in all digital images. Paired and student t -tests were performed to detect side and/or gender differences respectively. Calculated ratios of the perceived mesiodistal widths of the teeth were compared with their respective GP values using a one sample t -test. Statistical significance was set at 5%. Results For both genders, there were significant differences (P < 0.001) between the calculated ratios and the golden ratios. No side differences in the GP were detected. Males had wider teeth than females however significant differences between genders was detected for the centrals (P < 0.001) only. Conclusions Width ratios of the maxillary anterior teeth did not follow the GP for the examined Saudi population. Males had wider anterior teeth with the centrals exhibiting a significant gender-based difference. There was no side-dependent variation for both genders.

New complete dentures had a positive impact on TMD signs and symptoms, disc position and joint effusion but not on disc morphology.

No abstract

No abstract

Rational goals for denture construction are basically directed at the restoration of esthetics and masticatory function and the healthy preservation of the remaining natural tissues. Little concern has been given to the perfection and optimization of the phonetic quality of denture users. However, insertion of prosthodontic restorations may lead to speech defects. Most such defects are mild but, nevertheless, can be a source of concern to the patient. For the dental practitioner, there are few guidelines for designing a prosthetic restoration with maximum phonetic success. One of these guidelines involves the setting up of teeth within the neutral zone. The aim of this study was to evaluate, subjectively and objectively, the effect on speech of setting up teeth in the neutral zone. Three groups were examined: group I (control) included 10 completely dentulous subjects, group II included 10 completely edentulous patients with conventional dentures, and group III included the same 10 edentulous patients with neutral zone dentures. Subjective assessment included patient satisfaction. Objective assessment included duration taken for recitation of Al-Fateha and acoustic analysis. Subjectively, patients were more satisfied with their neutral zone dentures. Objectively, speech produced with the neutral zone dentures was closer to normal than speech with conventional dentures.