A new analytical expression for the size-dependent bandgap of colloidal semiconductor nanocrystals is proposed within the framework of the finite-depth square-well effective mass approximation in order to provide a quantitative description of the quantum confinement effect. This allows one to convert optical spectroscopic data (photoluminescence spectrum and absorbance edge) into accurate estimates for the particle size distributions of colloidal systems even if the traditional effective mass model is expected to fail, which occurs typically for very small particles belonging to the so-called strong confinement limit. By applying the reported theoretical methodologies to CdTe nanocrystals synthesized through wet chemical routes, size distributions are inferred and compared directly to those obtained from atomic force microscopy and transmission electron microscopy. This analysis can be used as a complementary tool for the characterization of nanocrystal samples of many other systems such as the II-VI and III-V semiconductor materials.

ABSTRACT:We address a novel method for analytical determinations that combines simplicity, rapidity, low consumption of chemicals, and portability with high analytical performance taking into account parameters such as precision, linearity, robustness, and accuracy. This approach relies on the effect of the analyte content over the Gibbs free energy of dispersions, affecting the thermodynamic stabilization of emulsions or Winsor systems to form microemulsions (MEs). Such phenomenon was expressed by the minimum volume fraction of amphiphile required to form (Φ ME ), which was the analytical signal of the method. Thus, the measurements can be taken by visually monitoring the transition of the dispersions from cloudy to transparent during the microemulsification, like a titration. It bypasses the employment of electric energy. The performed studies were: phase behavior, droplet dimension by dynamic light scattering, analytical curve, and robustness tests. The reliability of the method was evaluated by determining water in ethanol fuels and monoethylene glycol in complex samples of liquefied natural gas. The dispersions w f w − h z (w y ) w − ( hy y analysis) with ethanol as the hydrotrope phase. The mean hydrodynamic diameter values for the nanostructures in the droplet-based w − h z M w h f h f fication were conducted by adding ethanol to w − (W−O) x w h h f h k h Φ ME measurements were performed in a thermostatic water bath at 23 °C by direct observation that is based on the visual analyses of the media. The experiments to determine water demonstrated that the analytical performance depends on the composition of ME. It shows flexibility in the developed method. The linear range was fairly broad with limits of linearity up to 70.00% water in ethanol. For monoethylene glycol in water, in turn, the linear range was observed throughout the volume fraction of analyte. The best limits of detection were 0.32% v/v water to ethanol and 0.30% v/v monoethylene glycol to water. Furthermore, the accuracy was highly satisfactory. The natural gas samples provided by the Petrobras exhibited color, particulate material, high ionic strength, and diverse compounds as metals, carboxylic acids, and anions. These samples had a conductivity of up to 26 μ -1 ; the cond v y f hy y w y μ -1 . Despite such downsides, the method allowed accurate measures bypassing steps such as extraction, preconcentration, and dilution of the sample. In addition, the levels of robustness were promising. This parameter was evaluated by investigating the effect of (i) deviations in volumetric preparation of the dispersions and (ii) changes in temperature over the analyte contents recorded by the method.nalytical platforms for rapid tests are part of an important current research field that aims to perform in situ measurements, especially experiments such as urinalysis, food safety analysis, immunoassays, veterinary diagnostics, biothreats, drug abuse analysis, and environmental monitoring, in the developing world. Such technology is attractive because it is ...

We report the synthesis of 10,12-pentacosadyinoic acid (PCDA) and PCDA + cholesterol (CHO) + sphingomyelin (SPH) vesicles dispersed in water and the determination of their colorimetric response induced by small amount of organic solvents. In the absence of solvent, PCDA and PCDA/CHO/SPH vesicles showed an intense blue color. The addition of CHCl(3), CH(2)Cl(2), and CCl(4) caused a colorimetric transition (CT) in both structures with the following efficiency: CHCl(3) > CH(2)Cl(2) ≅ CCl(4). However, CH(3)OH did not cause a blue-to-red transition. By microcalorimetric technique we also determined, for the first time, the enthalpy change associated with the CT process and the energy of interaction between solvent molecules and vesicle self-assembly. We observed that the chloride solvents induced a colorimetric transition, but the thermodynamic mechanism was different for each of them. CT induced by CHCl(3) was enthalpically driven, while that caused by CH(2)Cl(2) or CCl(4) was entropically driven.

The effect of different ionic cosolutes (NaCl, Na(2)SO(4), Li(2)SO(4), NaSCN, Na(2)[Fe(CN)(5)NO], and Na(3)[Co(NO)(6)]) on the interaction between sodium dodecyl sulfate (SDS) and poly(ethylene oxide) (PEO) was examined by small-angle X-ray scattering (SAXS) and isothermal titration calorimetric techniques. The critical aggregation concentration values (cac), the saturation concentration (C(2)), the integral enthalpy change for aggregate formation (ΔH(agg)(int)) and the standard free energy change of micelle adsorption on the macromolecule chain (ΔΔG(agg)) were derived from the calorimetric titration curves. In the presence of 1.00 mmol L(-1) cosolute, no changes in the parameters were observed when compared with those obtained for SDS-PEO interactions in pure water. For NaCl, Na(2)SO(4), Li(2)SO(4), and NaSCN at 10.0 and 100 mmol L(-1), the cosolute presence lowered cac, increased C(2), and the PEO-SDS aggregate became more stable. In the presence of Na(2)[Fe(CN)(5)NO], the calorimetric titration curves changed drastically, showing a possible reduction in the PEO-SDS degree of interaction, possibility disrupting the formed nanostructure; however, the SAXS data confirmed, independent of the small energy observed, the presence of aggregates adsorbed on the polymer chain.

 Users may download and print one copy of any publication from the public portal for the purpose of private study or research.  You may not further distribute the material or use it for any profit-making activity or commercial gain  You may freely distribute the URL identifying the publication in the public portal If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.