No abstract

This work shows that incorporating highly compatible polyrhodanine nanoparticles (PRh-NPs) into a polyamide (PA) active layer allows for fabricating forward osmosis (FO) thin-film composite (TFC)-PRh membranes that have simultaneously improved antimicrobial, antifouling, and transport properties. To the best of our knowledge, this is the first reported study of its kind to this date. The presence of the PRh-NPs on the surface of the TFC-PRh membranes active layers is evaluated using FT-IR spectroscopy, SEM, and XPS. The microscopic interactions and their impact on the compatibility of the PRh-NPs with the PA chains were studied using molecular dynamics simulations. When tested in forward osmosis, the TFC-PRh-0.01 membrane (with 0.01 wt % PRh) shows significantly improved permeability and selectivity because of the small size and the high compatibility of the PRh-NPs with PA chains. For example, the TFC-PRh-0.01 membrane exhibits a FO water flux of 41 l/(m·h), higher than a water flux of 34 l/(m·h) for the pristine TFC membrane, when 1.5 molar NaCl was used as draw solution in the active-layer feed-solution mode. Moreover, the reverse solute flux of the TFC-PRh-0.01 membrane decreases to about 115 mmol/(m·h) representing a 52% improvement in the reverse solute flux of this membrane in comparison to the pristine TFC membrane. The surfaces of the TFC-PRh membranes were found to be smoother and more hydrophilic than those of the pristine TFC membrane, providing improved antifouling properties confirmed by a flux decline of about 38% for the TFC-PRh-0.01 membranes against a flux decline of about 50% for the pristine TFC membrane when evaluated with a sodium alginate solution. The antimicrobial traits of the TFC-PRh-0.01 membrane evaluated using colony-forming units and fluorescence imaging indicate that the PRh-NPs hinder cell deposition on the TFC-PRh-0.01 membrane surface effectively, limiting biofilm formation.

This work investigates the use of a silver-based metal-organic framework (MOF) for mitigating biofouling in forward-osmosis thin-film composite (TFC) membranes. This is the first study of the use of MOFs for biofouling control in membranes. MOF nanocrystals were immobilized in the active layer of the membranes via dispersion in the organic solution used for interfacial polymerization. Field emission scanning electron microscopy (FE-SEM) and X-ray photoelectron spectroscopy (XPS) characterization results showed the presence of the MOF nanocrystals in the active layer of the membranes. The immobilization improved the membrane active layer in terms of hydrophilicity and transport properties without adversely affecting the selectivity. It imparted antibacterial activity to the membranes; the number of live bacteria attached to the membrane surface was over 90% less than that of control membranes. Additionally, the MOF nanocrystals provided biocidal activity that lasted for 6 months. The immobilization improved biofouling resistance in the membranes, whose flux had a decline of 8% after 24 h of operation in biofouling experiments, while that of the control membranes had a greater decline of ∼21%. The better biofouling resistance is due to simultaneous improvement of antiadhesive and antimicrobial properties of the membranes. Fluorescence microscopy and FE-SEM indicated simultaneous improvement in antiadhesive and antimicrobial properties of the TFN membranes, resulting in limited biofilm formation.

In this study, a hydrophilic metal–organic framework (MOF) was applied to improve the performance of a cellulosic membrane for forward osmosis (FO) desalination application.

No abstract

No abstract

No abstract

No abstract