No abstract

Abstract-Time-redundancy techniques are commonly used in real-time systems to achieve fault tolerance without incurring high energy overhead. However, reliability requirements of hard real-time systems that are used in safety-critical applications are so stringent that time-redundancy techniques are sometimes unable to achieve them. Standby sparing as a hardwareredundancy technique can be used to meet high reliability requirements of safety-critical applications. However, conventional standby-sparing techniques are not suitable for lowenergy hard real-time systems as they either impose considerable energy overheads or are not proper for hard timing constraints. In this paper we provide a technique to use standby sparing for hard real-time systems with limited energy budgets. The principal contribution of this work is an online energymanagement technique which is specifically developed for standby-sparing systems that are used in hard real-time applications. This technique operates at runtime and exploits dynamic slacks to reduce the energy consumption while guaranteeing hard deadlines. We compared the low-energy standby-sparing (LESS) system with a low-energy timeredundancy system (from a previous work). The results show that for relaxed time constraints, the LESS system is more reliable and provides about 26% energy saving as compared to the time-redundancy system. For tight deadlines when the timeredundancy system is not sufficiently reliable (for safety-critical application), the LESS system preserves its reliability but with about 49% more energy consumption.

No abstract

Mixed-Criticality (MC) systems have emerged as an effective solution in various industries, where multiple tasks with various real-time and safety requirements (different levels of criticality) are integrated onto a common hardware platform. In these systems, a fault may occur due to different reasons, e.g., hardware defects, software errors or the arrival of unexpected events. In order to tolerate faults in MC systems, the re-execution technique is typically employed, which may lead to overrun of highcriticality tasks (HCTs), which necessitates the drop of low-criticality tasks (LCTs) or degrading their quality. However, frequent drops or relatively long execution times of LCTs (especially mission-critical tasks) are not always desirable and it may impose a negative impact on the performance, or the functionality of MC systems. In this regard, this paper proposes a realistic MC task model and develops a design-time task-drop aware schedulability analysis based on the Earliest Deadline First with Virtual Deadline (EDF-VD) algorithm. According to this analysis and the proposed scheduling policy based on the new MC task model, in the high-criticality (HI) mode, when an HCT overruns and the system switches to the HI mode, the number of drops per LCT is prohibited from passing a predefined threshold. In addition, to guarantee the real-time constraints and safety requirements of MC tasks in the presence of faults (assuming transient faults in this paper), a corresponding scheduling mechanism has been developed. According to the obtained results from an extensive set of simulations, which have been validated through a realistic avionic application, the proposed method improves the acceptance ratio by up to 43.9% compared to state-of-the-art.

No abstract

Abstract-Recently the trade-off between energy consumption and fault-tolerance in real-time systems has been highlighted. These works have focused on dynamic voltage scaling (DVS) to reduce dynamic energy dissipation and on time redundancy to achieve transient-fault tolerance. While the time redundancy technique exploits the available slack time to increase the faulttolerance by performing recovery executions, DVS exploits slack time to save energy. Therefore we believe there is a resource conflict between the time-redundancy technique and DVS. The first aim of this paper is to propose the usage of information redundancy to solve this problem. We demonstrate through analytical and experimental studies that it is possible to achieve both higher transient fault-tolerance (tolerance to single event upsets (SEU)) and less energy using a combination of information and time redundancy when compared with using time redundancy alone. The second aim of this paper is to analyze the interplay of transient-fault tolerance (SEU-tolerance) and adaptive body biasing (ABB) used to reduce static leakage energy, which has not been addressed in previous studies. We show that the same technique (i.e. the combination of time and information redundancy) is applicable to ABB-enabled systems and provides more advantages than time redundancy alone.

Abstract-Improving performance, reducing energy consumption and enhancing reliability are three important objectives for embedded computing systems design. In this paper, we study the joint impact of cache size selection on these three objectives. For this purpose, we conduct extensive fault injection experiments on five benchmark examples using a cycle-accurate processor simulator. Performance and reliability are analyzed using the performability metric. Overall, our experiments demonstrate the importance of a careful cache size selection when designing energy-efficient and reliable systems. Furthermore, the experimental results show the existence of optimal or Pareto-optimal cache size selection to optimize the three design objectives.

No abstract