The massive plastic production worldwide leads to a global concern for the pollution made by the plastic wastes and the environmental issues associated with them. One of the best solutions is replacing the fossil-based plastics with bioplastics. Bioplastics such as polylactic acid (PLA) are biodegradable materials with less greenhouse gas (GHG) emissions. PLA is a biopolymer produced from natural resources with good mechanical and chemical properties, therefore, it is used widely in packaging, agriculture, and biomedical industries. PLA products mostly end up in landfills or composting. In this review paper, the existing life cycle assessments (LCA) for PLA were comprehensively reviewed and classified. According to the LCAs, the energy and materials used in the whole life cycle of PLA were reported. Finally, the GHG emissions of PLA in each stage of its life cycle, including feedstock acquisition and conversion, manufacturing of PLA products, the PLA applications, and the end of life (EoL) options, were described. The most energy-intensive stage in the life cycle of PLA is its conversion. By optimizing the conversion process of PLA, it is possible to make it a low-carbon material with less dependence on energy sources.

Polyethylene (PE) is one the most used plastics worldwide for a wide range of applications due to its good mechanical and chemical resistance, low density, cost efficiency, ease of processability, non-reactivity, low toxicity, good electric insulation, and good functionality. However, its high flammability and rapid flame spread pose dangers for certain applications. Therefore, different flame-retardant (FR) additives are incorporated into PE to increase its flame retardancy. In this review article, research papers from the past 10 years on the flame retardancy of PE systems are comprehensively reviewed and classified based on the additive sources. The FR additives are classified in well-known FR families, including phosphorous, melamine, nitrogen, inorganic hydroxides, boron, and silicon. The mechanism of fire retardance in each family is pinpointed. In addition to the efficiency of each FR in increasing the flame retardancy, its impact on the mechanical properties of the PE system is also discussed. Most of the FRs can decrease the heat release rate (HRR) of the PE products and simultaneously maintains the mechanical properties in appropriate ratios. Based on the literature, inorganic hydroxide seems to be used more in PE systems compared to other families. Finally, the role of nanotechnology for more efficient FR-PE systems is discussed and recommendations are given on implementing strategies that could help incorporate flame retardancy in the circular economy model.

: Wound healing is a varied and complex process designed to promptly restore standard skin structure, function, and appearance. To achieve this goal, different immune and biological systems participate in coordination through four separate steps, including homeostasis, inflammation, proliferation, and regeneration. Each step involves the function of other cells, cytokines, and growth factors. However, chronic ulcers, which are classified into three types of ulcers, namely vascular ulcers, diabetic ulcers, and pressure ulcers, cannot heal through the mentioned natural stages. It causes mental and physical problems for these people and, as a result, imposes high economic and social costs on society. In this regard, using a system that can accelerate the healing process of such chronic wounds, as an urgent need in the community, should be considered. Therefore, in this study, the innovations of drug delivery systems for the healing of chronic wounds using hydrogels, nanomaterial, and membranes are discussed and reviewed.