No abstract

Tribochemistry plays a very important role in the behaviour of systems in tribologically loaded contacts under boundary lubrication conditions. Previous works have mainly reported contact mechanics simulations for capturing the boundary lubrication regime, but the real mechanism in which tribofilms reduce wear is still unclear. In this paper, the wear prediction capabilities of a recently published mechanochemical simulation approach (Ghanbarzadeh et al. in Tribol Int, 2014) are tested. The wear model, which involves a time-and spatially dependent coefficient of wear, was tested for two additive concentrations and three temperatures at different times, and the predictions are validated against experimental results. The experiments were conducted using a mini-traction machine in a sliding/rolling condition, and the spacer layer interferometry method was used to measure the tribofilm thickness. Wear measurements have been taken using a white-light interferometry. Good agreement is seen between simulation and experiment in terms of tribofilm thickness and wear depth predictions.

Understanding the true interfacial mechanisms involved in the growth of tribofilms generated by Zinc Dialkyl Dithiophosphate (ZDDP) is important because it is the most widely used antiwear additive and there is legislative pressure to find efficient environmentally-friendly replacements. The main focus of this study is to investigate the durability of the ZDDP tribofilm and correlate it to the chemical and physical properties of the glassy polyphosphates.A novel experimental method has been developed to study the effect of lubricant temperature and contact load on tribofilm growth and durability. Results show that physical parameters such as temperature and pressure significantly influence the tribofilm durability. XPS analyses were carried out before suspending the test and after changing the oil to assess the difference in chemical structure of the tribofilm before and after stopping the test. The chemical analyses suggest that there are different chemical properties across the thickness of the tribofilm and these determine the durability characteristics.

ReuseUnless indicated otherwise, fulltext items are protected by copyright with all rights reserved. The copyright exception in section 29 of the Copyright, Designs and Patents Act 1988 allows the making of a single copy solely for the purpose of non-commercial research or private study within the limits of fair dealing. The publisher or other rights-holder may allow further reproduction and re-use of this version -refer to the White Rose Research Online record for this item. Where records identify the publisher as the copyright holder, users can verify any specific terms of use on the publisher's website. TakedownIf you consider content in White Rose Research Online to be in breach of UK law, please notify us by emailing eprints@whiterose.ac.uk including the URL of the record and the reason for the withdrawal request . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 1 An experimental and analytical study of the effect of water and its tribochemistry on the tribocorrosive wear of boundary lubricated systems with ZDDP-containing oil AbstractWater has long been recognised as a contaminant in lubricants. It can affect wear performance, especially in bearing systems, in complex ways. Water can also induce corrosion, which in turn can enhance wear. The individual parts of any tribocorrosion system are related to a complex mix of system parameters such as lubricant and additives, relative humidity and temperature. The effect of different water concentrations and different temperatures has been studied experimentally in this work. A modification to Archard's wear coefficient was applied with respect to the experimental measurements. The new wear model considering the effect of water was implemented into the previously-reported numerical model to develop a new semi-deterministic numerical wear model adapted to the tribocorrosion system in this work. IntroductionWater in lubricants has been known to be a contaminant for many systems (1-3). It is shown to affect the wear performance, especially in bearing systems, in different ways (4-10). The presence of water in lubricated tribosystems, particularly in bearing applications, can cause corrosion and hydrogen embrittlement, which can increase wear and friction (8). In addition, even small amount of water in parts per million (ppm) may accelerate the oxidation of oil (11).To investigate the effect of water contamination on the performance of lubricated systems, it is essential to know the form that water exists in the oil (12). Water can be present in oil in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 2 two different forms which are dissolved water and free water (13). D...

No abstract