In this study, a dual-port wind-energy conversion system has been proposed. A double-fed permanentmagnet synchronous generator (DFPMSG) forms the central part of the system, where the concentrated single-layer winding configuration of the generator enables electric and magnetic isolation between the ports. DFPMSG has two three-phase terminals out of the stator; one is connected directly to the grid, whereas the other is tied to the grid through a back-to-back converter. This study investigates design issues caused by the DFPMSG port with a direct grid connection. The unique design issues of the proposed system include determining the slot/pole combination using wind data and determining the minimum reactive power requirement for the port with a direct grid connection. Next, the load-sharing capability among the ports of the proposed system is presented through a detailed investigation of three schemes. Experimental work is presented for a 5-kW prototype DFPMSG system to illustrate the isolation among the ports, minimized reactive power demand on the port with direct grid connection, and load-sharing ability among the ports for different control schemes.INDEX TERMS Double-fed machines, electric machine design, multi-port systems, permanent magnet synchronous generators, wind energy.
Bu çalışmada, sabit mıknatıslı senkron motorların tasarım parametrelerinden biri olan oluk açıklığının, motor performans metriklerine etkisi analitik olarak incelenmiştir. Mıknatısların ürettiği manyetik akı yoğunluğu, oluk etkisi ve harmonikler dahil edilerek hesaplanmıştır. Oluk açıklığına göre değişiklik gösteren motor hızı, sargı direnci ve elektriksel moment değerleri paylaşılmıştır. Teorik olarak, önemli performans metriklerinden biri olan başlangıç momentinin oluk açıklığı genişletilerek artırılabileceği gösterilmiştir.
ÖzetKablo uzunluğu ölçümü, iletim hatlarındaki arıza yerlerinin tespit edilmesi, kullanılan kablo miktarlarının belirlenmesi gibi hususlarda önem arz etmektedir. Bu çalışmada, farklı türdeki kabloların uzunluğunun ölçümü için ayarlanabilen, taşınabilir bir sistem ve kullanımı kolay bir arayüz hazırlanmıştır. Zaman uzayında yansımaölçer (Time Domain Reflectometry) sistemi uygulaması için açık kaynak kodlu, ölçüm ve kontrol kartı olan Red Pitaya, kablo ölçümü için yapılandırılıp kullanılmıştır. Python dilinde arayüz hazırlanmıştır. Farklı türde ve uzunluktaki kablolar için sistem test edilmiş ve sonuçlar paylaşılmıştır.Anahtar Kelimeler -Kablo uzunluk ölçümü, mikrodenetleyici, zaman uzayında yasımaölçer (TDR)
A Microcontroller Based Time Domain Reflectometry (TDR) Application for Cable Length MeasuringAbstract Cable length measuring is important for some cases such as detecting fault location in transmission lines, determining the amount of cable used in wiring. In this study, a configurable, portable system and easy to use interface are prepared to measure different types of cable's lenght. Red Pitaya board which is an open source measurement and control tool, is configured and used for time domain reflectometry (TDR) application. An interface is designed in the Python language. System is tested for cables in different types and lenghts and the results are shared.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.