Perception is a vital part of driving. Every year, the loss in visibility due to snow, fog, and rain causes serious accidents worldwide. Therefore, it is important to be aware of the impact of weather conditions on perception performance while driving on highways and urban traffic in all weather conditions. The goal of this paper is to provide a survey of sensing technologies used to detect the surrounding environment and obstacles during driving maneuvers in different weather conditions. Firstly, some important historical milestones are presented. Secondly, the state-of-the-art automated driving applications (adaptive cruise control, pedestrian collision avoidance, etc.) are introduced with a focus on all-weather activity. Thirdly, the most involved sensor technologies (radar, lidar, ultrasonic, camera, and far-infrared) employed by automated driving applications are studied. Furthermore, the difference between the current and expected states of performance is determined by the use of spider charts. As a result, a fusion perspective is proposed that can fill gaps and increase the robustness of the perception system.

Robust lane detection is imperative for the realization of intelligent transportation. Recently, vision-based systems that employ deep convolution neural networks (CNNs) for lane detection have made considerable progress. However, for better generalization under various road conditions learning-based methods require excessive training data, which becomes non-trivial in challenging conditions such as illumination variation, shadows, false lane lines, and worn lane markings, etc. In this paper, we propose a light field (LF) based lane detection method that utilizes the additional angular information for improved prediction and increased robustness. Two different LF representations are investigated to study the possibility of maximum performance improvement and minimal additional computation cost and data labeling efforts. Experimental results successfully demonstrate that the proposed approach improves the prediction of the lane line point coordinates and is significantly robust against the aforementioned adverse conditions.INDEX TERMS Lane detection, light field imaging, convolutional neural networks, intelligent transportation.

This paper deals with the design of an energy management strategy (EMS) for an industrial hybrid self-guided vehicle (SGV), considering the size of a fuel cell (FC) stack and degradation of a battery pack. In this context, first, a realistic energy model of the SGV was proposed and validated, based on experiments. This model provided a basis for individual components analysis, estimating energy requirements, component sizing, and testing various EMSs, prior to practical implementation. Second, the performance of the developed FC/battery SGV powertrain was validated under three EMS modes. Each mode was studied by considering four different FC sizes and three battery degradation levels. The final results showed that a small FC as a range extender is recommended, to reduce system cost. It is also important to maintain the FC in its high efficiency zones with a minimum ON/OFF cycle, leading to efficiency and lifetime enhancement of FC system. Battery SOC have to be kept at a high level during SGV operation, to support the FC during SGV acceleration. In order to improve the SGV’s overall autonomy, it is also important to minimize the stop and go and rotational SGV motion with appropriate acceleration and deceleration rate.

Automated industrial vehicles are taking an imposing place by transforming the industrial operations, and contributing to an efficient in-house transportation of goods. They are expected to bring a variety of benefits towards the Industry 4.0 transition. However, Self-Guided Vehicles (SGVs) are battery-powered, unmanned autonomous vehicles. While the operating durability depends on self-path design, planning energy-efficient paths become crucial. Thus, this paper has no concrete contribution but highlights the lack of energy consideration of SGV-system design in literature by presenting a review of energy-constrained global path planning. Then, an experimental investigation explores the long-term effect of battery level on navigation performance of a single vehicle. This experiment was conducted for several hours, a deviation between the global trajectory and the ground-true path executed by the SGV was observed as the battery depleted. The results show that the mean square error (MSE) increases significantly as the battery’s state-of-charge decreases below a certain value.

In recent years, the use of electric Autonomous Wheeled Mobile Robots (AWMRs) has dramatically increased in transport of the production chain. Generally, AWMRs must operate for several hours on a single battery charge. Since the energy density of the battery is limited, energy efficiency becomes a key element in improving material transportation performance during the manufacturing process. However, energy consumption is influenced by the navigation stages, because the type of motion necessary for the AWMR to perform during a mission is totally defined by these stages. Therefore, this paper analyzes methods of energy efficiency that have been studied recently for AWMR navigation stages. The selected publications are classified into planning and motion control categories in order to identify research gaps. Unlike other similar studies, this work focuses on these methods with respect to their implications for the energy consumption of AWMRs. In addition, by using an industrial Self-Guided Vehicle (SGV), we illustrate the direct influence of the motion planning stage on global energy consumption by means of several simulations and experiments. The results indicate that the reaction of the SGV in response to unforeseen obstacles can affect the amount of energy consumed. Hence, energy constraints must be considered when developing the motion planning of AWMRs.