Objective:To study the effects of different disease-modifying antirheumatic drugs (DMARD) on different events mediated by IL-15-activated lymphocytes.Methods:Peripheral blood lymphocytes (PBL) were isolated from healthy donors and activated with IL-15 after exposure to different DMARD: leflunomide, cyclosporin A, methotrexate, mycophenolic acid, FK-506, sulphasalazine and sodium aurothiomalate. The expression of different surface molecules on the PBL was then determined by flow cytometry. Cells were also co-cultured with the monocytic cell line THP-1 and the tumour necrosis factor (TNF) concentration in the supernatant was measured after 24 h using an immunoenzyme assay. The effect of the aforementioned drugs on IL-17 production by IL-15-activated PBL was also studied.Results:Treatment of PBL with leflunomide, cyclosporin A and FK-506 inhibited the IL-15-induced expression of both CD54 and CD69 by PBL, as well as TNF production in co-cultures of activated PBL and THP-1 cells. The downregulation of CD54 and CD69 in PBL was correlated with the inhibition of TNF production. Likewise, leflunomide, cyclosporin A and FK-506 all inhibited IL-17 production in IL-15-activated PBL. Interestingly, the effect of leflunomide was not reverted by the presence of uridine in the medium. In addition, leflunomide inhibited the phosphorylation of STAT6 in vitro.Conclusion:Inhibition of the JAK/STAT pathway may represent an additional effect of leflunomide in chronic polyarthritis because it impairs certain events that control proinflammatory TNF and IL-17 cytokine production.
Amidst the new techniques facing the improvement of cooling and insulating efficiency and the design of electric transformers, constrained by the current technologies, one of the more promising is the substitution of traditional dielectric oils for nanofluids. Research on nanofluids for their application in transformers as a coolant and dielectric medium have been performed during the last two decades and continue today. This review tries to collect and analyze the available information in this field and to offer it already dissected to researchers, focusing on the preparation methods and how nanoparticles affect the main properties of the base fluids. Here we also addressed the influence of different parameters as particle characteristics or environmental conditions in nanofluids performance, the evolution with time of the measured properties, or the neighboring relationship of nanofluids with other transformer components. In this sense, the most reviewed articles reflect enhancements of thermal conductivity or dielectric strength, as well as an improvement of time evolution of these properties, with respect to those that are found in base fluids, and, also, a better interaction between these nanofluids and dielectric cellulosics. Thus, the use of dielectric nanofluids in transformers may allow these machines to work safer or over their design parameters, reducing the risk of failure of the electrical networks and enhancing their life expectancy. Nevertheless, these advantages will not be useful unless a proper stability of nanofluids is ensured, which is achieved in a small part of revised articles. A compendium of the preparation methodology with this aim is proposed, to be checked in future works.
Mineral oil has traditionally been used as a cooling fluid in power transformers, but its low biodegradability and low fire point have motivated the search of alternatives. In this work, six different dielectric fluids have been studied, including four vegetable liquids, from sunflower, rapeseed, soybean, and palm, one synthetic ester and a mineral oil used for comparison. These oils were subjected to an accelerated thermal ageing in glass vessels at 150 • C for four weeks (672 hours) in presence of Kraft insulating paper. Different oils parameters were measured during the ageing, i.e. breakdown voltage, dielectric dissipation factor, permittivity, DC resistivity, density, kinematic viscosity, flash and fire points, interfacial tension, acidity, and dissolved gases; additionally, the degree of polymerisation (DP) of the paper was measured. Results showed that the changes of the natural esters properties, except for the palm oil, were similar along the ageing time. Palm oil results were similar to those of the mineral oil, whereas synthetic ester showed a behaviour similar to natural esters. The kraft paper degradation was higher in the mineral oil, followed by the synthetic ester and the palm oil. No significant differences were found in the ageing with the natural esters.INDEX TERMS Insulating paper, natural esters, thermal ageing, transformers.
In the manufacturing of power transformers, the impregnation of the solid electric insulation systems (cellulosic materials) with a dielectric liquid is a key issue for increasing the breakdown voltage of the insulation, and this prevents the apparition of partial discharges that deteriorate the insulation system. After introducing the problem, this article presents the theory of impregnation and later carries out a bibliographical review. Traditionally, mineral oils have been used as the dielectric liquid in electrical transformers, but for environmental (low biodegradability) and safety (low ignition temperature) reasons, since the mid-1980s, their substitution with other ester-type fluids has been studied. However, these liquids have some drawbacks, including their higher viscosity (especially at low temperatures). This property, among other aspects, makes the impregnation of cellulosic materials, which is part of the transformer manufacturing process, difficult, and therefore this tends to lengthen the manufacturing times of these machines.
Oscillatory fluctuations of a single proton exchange membrane fuel cell appear upon operation with a dry cathode air supply and a fully humidified anode stream. Periodic transitions between a low-and high-current operation point of the oscillating state due to the balance of drying and wetting processes in combination with water transport have been observed previously; however, several new aspects have been investigated in the present study, providing insight into the initiation processes. The oscillations are caused by periodic flow type changes from one-to two-phase flow in the anodic channels of the flow field. It has been observed that cell orientation with respect to Earth's gravity field affects the liquid water distribution in the anodic flow channels and, thus, also affects the oscillatory behavior of the cell performance.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.