No abstract

In this paper, a planar active phased array antenna demonstration with linear polarization (LP) at Ka Band (28-30 GHz) is presented. The proof of concept is carried out to evaluate the possible problems that may arise, to analyze possible calibration stages and to assess the viability of the integration of an active system with a Multi-Channel Beamforming Module (MCBM). To fulfill this task an 8x8-element planar array arranged in column subarrays of 1x8 elements for 1D beam steering is proposed. The single element consists of a printed circular patch connected to a microstrip feeding line through metallic vias in a multilayered structure. Both the amplitude and phase distributions are performed by a commercial integrated circuit (IC) designed for transmission purposes, from the common port to each of the 8 output ports. Thus, an evaluation of the IC performance is also included within this work. Despite the inherent amplitude and phase feeding errors of the IC, the beam-steering accuracy of the system is reasonable. A nice correspondence between the simulated and measured 8x8-element array beam steering directions is obtained, with errors below 1º in the steering of the beam.INDEX TERMS Active phased array, beam steering, antenna integrated circuit, Ka band antenna.

This paper introduces a near-field measurement system concept for the fast testing of linear arrays suited for mass production scenarios where a high number of nominally identical antennas needs to be measured. The proposed system can compute the radiation pattern, directivity and gain on the array plane, as well as the array complex feeding coefficients in a matter of seconds. The concept is based on a multi-probe antenna array arranged in a line which measures the near field of the antenna under test in its array plane. This linear measurement is postprocessed with state-of-the-art single-cut transformation techniques. To compensate the lack of full 3D information, a previous complete characterization of a “Gold Antenna” is performed. This antenna is nominally identical to the many ones that will be measured with the proposed system. Therefore, the data extracted from this full characterization can be used to complement the postprocessing steps of the single-cut measurements. An X-band 16-probe demonstrator of the proposed system is implemented and introduced in this paper, explaining all the details of its architecture and operation steps. Finally, some measurement results are given to compare the developed demonstrator with traditional anechoic measurements, and show the potential capabilities of the proposed concept to perform fast and reliable measurements.

No abstract