Este é um artigo publicado em acesso aberto (Open Access) sob a licença Creative Commons Attribution Non-Commercial, que permite uso, distribuição e reprodução em qualquer meio, sem restrições desde que sem fins comerciais e que o trabalho original seja corretamente citado.
Study of Negative Polarity Parameters in MIG/MAG Variable Polarity Welding for CladdingAbstract: This article aims to investigate the effects of the negative polarity parameters of the current curve on the result of the dilution of the weld beads in the MIG / MAG variable polarity welding process, targeting to find a set of parameters that offer a lower dilution, which is fundamental for welding for cladding. Through a design of experiments Box-Behnken with three control factors (negative current, negative current time and base current time) varying in three levels each, stainless steel weld beads were deposited on carbon steel. For this process, dilution values of 12% to 15% were achieved, ideal values for cladding welding. The significance of the negative current time in the dilution results was verified, showing the possibility of using negative polarity in the MIG/MAG welding process applied to the cladding.
A competitividade entre as indústrias, é um fator que vem estimulando cada vez mais que os processos internos sejam realizados da melhor maneira, tornando a empresa mais eficiente e produtiva. Para que isso ocorra, é necessário identificar as perdas que afetam seu sistema de produção, buscando a redução ou até mesmo a eliminação das mesmas. Deste modo, o objetivo do presente trabalho, é aumentar a eficiência e a produtividade dos recursos de um setor de uma indústria moveleira de médio porte, reduzindo as perdas de seus processos. Foram analisados os recursos do setor escolhido, e a plaina moldureira D apresentou os menores indicadores. Este recurso, teve o indicador Overall Equipment Effectiveness (OEE) implementado para que fosse acompanhado ao longo de quatro meses, sendo que nos dois primeiros meses, os resultados de OEE foram de 26,4% e 28% respectivamente. Sendo assim, identificou-se as principais perdas e causas que o afetavam, utilizando ferramentas como o gráfico de Pareto, diagrama de causa e efeito e brainstorming. Melhorias foram implementadas e posteriormente monitoradas nos segundos dois meses, onde os resultados chegaram à 51,3% e 52%, ou seja, houve um aumento de 25,6% do indicador de OEE. Desta forma, pode-se alcançar o objetivo principal, onde o recurso em questão teve suas perdas reduzidas e consequentemente seus níveis de eficiência e produtividade elevados.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.