An application of ion exchange chromatography for C-peptide analysis is described here. At the stage of C-peptide isolation, a strong cation exchanger (SP HP or MonoS) was used to purify the analyte from ballast proteins and peptides. The conditions of ion-exchange chromatographic separations were optimized using theoretical modeling of the net surface electric charge of the peptide as a function of pH. The purified and concentrated sample was further subjected to LC-MS/MS. In order to improve the reliability of analysis, two fragment ions were monitored simultaneously both for native C-peptide and internal standard, isotopically labeled C-peptides analogues (fragments with m/z of 927.7 and 147.2). Using ion-exchange chromatography, it became possible to process larger sample volumes, important for testing patients with very low C peptide levels, compared to currently used solid phase extraction methods.

The conductivity properties of natural pH gradient created by carrier ampholytes were studied during the process of isoelectric focusing (IEF). IEF was performed in capillaries (10-30 mm long) or in microchips with the same channel length. A 10-30x reduction of the conductivity of the separation medium was observed during the establishment of pH gradient. Results obtained using different IEF voltages indicate that there is a nonlinear relationship between the conductivity of an established pH gradient and the applied electric field. Our theoretical analysis using a simplified model generated values that reasonably agree with the experimental data. In addition, we found that above a certain electric field ( approximately 300 V/cm), resolution does not increase with the applied voltage as predicated; we observed band-broadening and gel breakdown. The approach presented in this work can be used for optimization of the IEF separation and judicious selection of IEF conditions.

Background: The UNO/RIC Nanopore Detector provides a new way to study the binding and conformational changes of individual antibodies. Many critical questions regarding antibody function are still unresolved, questions that can be approached in a new way with the nanopore detector.

Capillary electrophoresis in acidic, isoelectric buffers is a novel methodology allowing fast protein and peptide analysis in uncoated capillaries. Due to the low pH adopted and to the use of dynamic coating with cellulose derivatives, silanol ionization is essentially suppressed and little interaction of macromolecules with the untreated wall occurs. In addition, due to the low conductivity of quasi-stationary, isoelectric buffers, high-voltage gradients can be applied (up to 800 V/cm) permitting fast peptide analysis with a high resolving power due to minimal diffusional peak spreading. Four such buffers are here described: cysteic acid (Cys-A, pI 1.85), iminodiacetic acid (IDA, pI 2.23), aspartic acid (Asp, pI 2.77) and glutamic acid (Glu, pI 3.22). A number of applications are reported, ranging from food analysis to the study of folding/unfolding transitions of proteins.

No abstract