The present paper provides a physically sound numerical modeling of liquid flows experimentally observed inside a vertical circular cylinder with a stationary envelope, rotating bottom and open top. In these flows, the resulting vortex depth may be such that the rotating bottom disk becomes partially exposed, and rather peculiar polygon shapes appear. The parameters and features of this work are chosen based on a careful analysis of the literature. Accordingly, the cylinder inner radius is 145 mm and the initial water height is 60 mm. The experiments with bottom disk rotation frequencies of 3.0, 3.4, 4.0 and 4.6 Hz are simulated. The chosen frequency range encompasses the regions of ellipse and triangle shapes as observed in the experimental studies reported in the literature. The free surface flow is expected to be turbulent, with the Reynolds number of O(105). The Large Eddy Simulation (LES) is adopted as the numerical approach, with a localized dynamic Subgrid-Scale Stresses (SGS) model including an energy equation. Since the flow obviously requires a surface tracking or capturing method, a volume-of-fluid (VOF) approach has been chosen based on the findings, where this method provided stable shapes in the ranges of parameters found in the corresponding experiments. Expected ellipse and triangle shapes are revealed and analyzed. A detailed character of the numerical results allows for an in-depth discussion and analysis of the mechanisms and features which accompany the characteristic shapes and their alterations. As a result, a unique insight into the polygon flow structures is provided.
Rotating flows with free-surface vortices can be found in many engineering applications, such as pump and turbine intakes, vessels and nuclear reactors. The need to address rather different flow regions existing in such flows, such as Ekman and Stewartson layers and the line vortex zone, in a coupled manner, makes modeling of free-surface rotating flows very challenging. <p>In this work, the flow field of a free-surface vortex, created in a rotating cylinder with a drain hole in its bottom, is investigated numerically and analytically. Above the drain hole of the cylinder, a free-surface vortex, accompanied by axial velocity, is created. This axial velocity profile is governed by the Ekman boundary layer far from the axis and by the drainage in its proximity. The experiments of Andersen et al. (2003a, 2006) on the so-called bathtub vortex are numerically modeled with the finite volume method. The simulations are validated with the available measurements from the experiments.</p> <p>Using the simulation results, self-similar and non-self-similar models, describing the velocity fields in the Ekman boundary layer, are compared and tested. It is shown that the self-similar model is more accurate than the non-self-similar model. It is also demonstrated that the analytical model of Andersen et al. (2003a, 2006), when modified as suggested in the present study, is capable of predicting the free-surface profile for low rotation rates. However, for high rotation rates, only the numerical simulation can predict the relation between the flow field within the liquid and the free-surface profile.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.