No abstract

Laboratory and greenhouse studies were conducted to determine imazaquin and imazethapyr adsorption, mobility, and efficacy in Sharpsburg silty clay loam, Holdrege silt loam, and Tripp sandy loam soils after adjusting pH to 5, 6, and 7. Both herbicides were more strongly absorbed, less mobile, and less efficacious at a lower pH. Observations were attributed to ionic bonding resulting from protonation of basic functional groups on the herbicide molecules as pH decreased. Adsorption was greatest in the silty clay loam and least in the sandy loam soil. Conversely, the herbicides were more efficacious and mobile in the more coarse-textured soils. Imazethapyr was less mobile, more highly adsorbed, and more phytotoxic than imazaquin. Greater adsorption of imazethapyr was attributed to a stronger basic pKaand steric factors.

Photosystem II (PS II) inhibitors halt electron flow within the photosynthetic electron transport chain, thereby leading to increased oxidative stress. As a result, their addition to mesotrione, which inhibits carotenoid biosynthesis by inhibition of the enzyme 4-hydroxyphenylpyruvate dioxygenase (HPPD), is complementary. Field and greenhouse experiments were conducted in 2002 and 2003 to investigate the joint action of POST mesotrione plus PS II inhibitor herbicide combinations. The joint action of mesotrione plus PS II inhibitors was investigated across five plant species, three PS II inhibitors, and two moisture environments to determine their influence on the joint action response. Rates of mesotrione evaluated ranged from 4.4 to 87.6 g ai/ha alone and in combination with reduced rates of atrazine, bromoxynil, and metribuzin. In the field, all combinations of mesotrione at 8.8, 17.5, and 35.0 g/ha plus atrazine, bromoxynil, or metribuzin were synergistic for necrosis 6 d after treatment (DAT) on sunflower. Addition of atrazine at 280 g/ha to mesotrione at 8.8 g/ha increased velvetleaf leaf necrosis by 18 to 47%. In the greenhouse, the addition of bromoxynil at 70 g/ha to mesotrione at 17.5 g/ha increased leaf necrosis by 23 to 34% and biomass reduction by 38 to 47%. Synergism on Palmer amaranth occurred similarly under both normal and dry moisture environments at application. Plant height at application was found to influence detection of synergism on the whole-plant level.

After many years of fusion research, the conditions needed for a D–T fusion reactor have been approached on the Tokamak Fusion Test Reactor (TFTR) [Fusion Technol. 21, 1324 (1992)]. For the first time the unique phenomena present in a D–T plasma are now being studied in a laboratory plasma. The first magnetic fusion experiments to study plasmas using nearly equal concentrations of deuterium and tritium have been carried out on TFTR. At present the maximum fusion power of 10.7 MW, using 39.5 MW of neutral-beam heating, in a supershot discharge and 6.7 MW in a high-βp discharge following a current rampdown. The fusion power density in a core of the plasma is ≊2.8 MW m−3, exceeding that expected in the International Thermonuclear Experimental Reactor (ITER) [Plasma Physics and Controlled Nuclear Fusion Research (International Atomic Energy Agency, Vienna, 1991), Vol. 3, p. 239] at 1500 MW total fusion power. The energy confinement time, τE, is observed to increase in D–T, relative to D plasmas, by 20% and the ni(0) Ti(0) τE product by 55%. The improvement in thermal confinement is caused primarily by a decrease in ion heat conductivity in both supershot and limiter-H-mode discharges. Extensive lithium pellet injection increased the confinement time to 0.27 s and enabled higher current operation in both supershot and high-βp discharges. Ion cyclotron range of frequencies (ICRF) heating of a D–T plasma, using the second harmonic of tritium, has been demonstrated. First measurements of the confined alpha particles have been performed and found to be in good agreement with TRANSP [Nucl. Fusion 34, 1247 (1994)] simulations. Initial measurements of the alpha ash profile have been compared with simulations using particle transport coefficients from He gas puffing experiments. The loss of alpha particles to a detector at the bottom of the vessel is well described by the first-orbit loss mechanism. No loss due to alpha-particle-driven instabilities has yet been observed. D–T experiments on TFTR will continue to explore the assumptions of the ITER design and to examine some of the physics issues associated with an advanced tokamak reactor.

Order of magnitude improvements in the level and curation of current driven by lower hybrid waves have been chieved in the PLT tokamak. Steady currents up to 175 kA have been maintained for three seconds and 400 kA for 0.3 sec by the rf power alone. The principal current carrier appears to be a high energy (-100 keV) electron component, concentrated in the central 20-40 cm diameter core of the 80 cm PLT discharge. DISimtOTI OF THIS DOCUMENT is mump .\JLA

Weed competitiveness can be quantified with the concept of competitive index (CI), a relative scale of weed competitiveness. Field studies were conducted in 2002 and 2003 in northeastern and southeastern Nebraska to evaluate the influence of soybean row spacing and relative weed emergence time on the competitiveness of major weed species in soybean. Ten weed species were seeded in soybean spaced 19 and 76 cm apart at the planting, emergence, and first trifoliate leaf stages of soybean. Total weed dry matter (TDM), weed plant volume, and percent soybean yield loss were arbitrarily selected as a base for determining the CI for each weed species. Soybean yield loss was the least variable parameter used to quantify weed competitiveness and rank their CIs. In general, weeds grown with soybean planted in 19-cm rows produced less TDM, plant volume, and reduced soybean yield less than weed species grown in 76-cm rows. Later-emerging weeds produced less TDM, plant volume, and reduced soybean yield less than the early-emerging ones. In general, broadleaf species were more competitive than grass weed species. Common sunflower was the most competitive weed species in this study.

Herbicide‐resistant crops like glyphosate resistant (GR) soybean [Glycine max (L.) Merr.] are gaining acceptance in U.S. cropping systems. Comparisons from cultivar performance trials suggest a yield suppression may exist with GR soybean. Yield suppressions may result from either cultivar genetic differentials, the GR gene/gene insertion process, or glyphosate. Grain yield of GR is probably not affected by glyphosate. Yield suppression due to the GR gene or its insertion process (GR effect) has not been reported. We conducted a field experiment at four Nebraska locations in 2 yr to evaluate the GR effect on soybean yield. Five backcross‐derived pairs of GR and non‐GR soybean sister lines were compared along with three high‐yield, nonherbicide‐resistant cultivars and five other herbicide‐resistant cultivars. Glyphosate resistant sister lines yielded 5% (200 kg ha−1) less than the non‐GR sisters (GR effect). Seed weight of the non‐GR sisters was greater than that of the GR sisters (in 1999) and the non‐GR sister lines were 20 mm shorter than the GR sisters. Other variables monitored were similar between the two cultivar groups. The high‐yield, nonherbicide‐resistant cultivars included for comparison yielded 5% more than the non‐GR sisters and 10% more than the GR sisters.

Studies to predict pesticide fate often lack measurements of model input parameters. Using independent data sets and understanding how soil properties affect herbicide retention and degradation may result in more accurate prediction of herbicide fate. We conducted laboratory studies to determine the influence of soil properties on atrazine adsorption and degradation. These data will be used in a separate study involving a pesticide fate model. Atrazine adsorption and desorption isotherms were constructed for six soil depths of a Hastings silty clay loam (fine, montmorillonitic, mesic Udic Argiustoll) using batch equilibration. The Freundlich adsorption constants (logKf) ranged from 0.38 (60 to 90 cm) to 2.91 (0 to 30 cm). Adsorption was higher in the low pH, high organic matter-containing surface soil compared to the lower soil depths. Multiple regression of the adsorption constants against selected soil properties indicated that organic matter content was the best single predictor of atrazine adsorption (R2= 0.98) followed by soil pH (R2= 0.82). Combining organic matter and cation exchange capacity in the model produced the lowestCpstatistic (2.33) and highestR2value (0.99). We observed hysteresis in atrazine adsorption–desorption isotherms by higher adsorption slopes (1/n)adscompared to desorption slopes (1/n)des. Soils that adsorbed more atrazine also desorbed less atrazine. Desorption correlated negatively with organic matter content and positively with soil pH. Atrazine degradation after 84 d of incubation generally decreased with increasing depth. The first-order degradation rate was highest 0 to 30 cm deep (0.0187 day−1) and lowest 270 to 300 cm deep (0.0031 day−1). Atrazine degradation was faster in soil treated annually for 12 yr than in soil with no previous atrazine history (p = 0.01).