The development of improved cold-cured resins, to be used as either adhesives or matrices for FRP (fiber reinforced polymer) composites employed in the construction industry, has become the focus of several academic and industrial research projects. It is expected that the use of nano-structured organic–inorganic hybrid materials could represent a realistic alternative to commercial epoxy-based resins due to their superior properties, especially in terms of higher durability against: moisture, temperatures, harsh environments, and fire. In this context, organic–inorganic epoxy hybrids were synthesized by a modified sol–gel method without the addition of water. The experimental formulations were prepared starting from a mixture of a silane-functionalized epoxy resin, alkoxysilane components and a deep eutectic solvent (DES) based on a blend of choline chloride and urea. The latter was added in two different loads in order to analyze in depth its effect as a promoter for an effective dispersion of silica nano-phases, formed through hydrolysis and condensation reactions, into the cross-linked epoxy network. The produced formulations were cold-cured for different time spans in the presence of two hardeners, both suitable for a curing process at ambient temperature. In this first part of a wider experimental program, several analyses were carried out on the liquid (rheological and calorimetric) and cold-cured (calorimetric, thermogravimetric, dynamic-mechanical, flexural mechanical, and morphological) systems to evaluate and quantify the improvement in properties brought about by the presence of two different phases (organic and inorganic) in the same epoxy-based hybrid system.
The aim of the present work is the development of amorphous thermoplastic matrix nanocomposites based on graphite nanoparticles. Different types of graphite were used, including unmodified graphite, graphene nanoplatelets and graphite intercalation compounds. Graphite intercalation compounds were subjected to thermal treatment to attain exfoliation of the nanofiller. The exfoliation process was studied by means of thermal analysis. The nanofillers and nanocomposites were characterized by means of X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM) analysis. The nanocomposites were further characterized by means of mechanical and dielectric analysis. The flammability of the nanocomposites was also analyzed. Results obtained indicate that addition of the nanofiller allows improving the proprieties of the amorphous thermoplastic matrix. The effect of the degree of dispersion of the nanofiller is particularly relevant for the dielectric properties of the nanocomposites, whereas no direct correlation between degree of dispersion and mechanical properties can be observed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.