The transition toward circular economy models has been progressively promoted in the last few years. Different disciplines and strategies may significantly support this change. Although the specific contribution derived from design, material science, and additive manufacturing is well-established, their interdisciplinary relationship in circular economy contexts is relatively unexplored. This paper aims to review the main case studies related to new circular economy models for waste valorization through extrusion-based additive manufacturing, circular materials, and new design strategies. The general patterns were investigated through a comprehensive analysis of 74 case studies from academic research and design practice in the last six-year period (2015–2021), focusing on the application fields, the 3D printing technologies, and the materials. Further considerations and future trends were then included by looking at the relevant funded projects and case studies of 2021. A broader number of applications, circular materials, and technologies were explored by the academic context, concerning the practice-based scenario linked to more consolidated fields. Thanks to the development of new strategies and experiential tools, academic research and practice can be linked to foster new opportunities to implement circular economy models.

No abstract

Despite the large use of composites for industrial applications, their end-of-life management is still an open issue for manufacturing, especially in the wind energy sector. Additive manufacturing technology has been emerging as a solution, enhancing circular economy models, and using recycled composites for glass fiber-reinforced polymers is spreading as a new additive manufacturing trend. Nevertheless, their mechanical properties are still not comparable to pristine materials. The purpose of this paper is to examine the additive re-manufacturing of end-of-life glass fiber composites with mechanical performances that are comparable to virgin glass fiber-reinforced materials. Through a systematic characterization of the recyclate, requirements of the filler for the liquid deposition modeling process were identified. Printability and material surface quality of different formulations were analyzed using a low-cost modified 3D printer. Two hypothetical design concepts were also manufactured to validate the field of application. Furthermore, an understanding of the mechanical behavior was accomplished by means of tensile tests, and the results were compared with a benchmark formulation with virgin glass fibers. Mechanically recycled glass fibers show the capability to substitute pristine fillers, unlocking their use for new fields of application.

Fused filament fabrication allows the direct manufacturing of customized and complex products although the layer-by-layer appearance of this process strongly affects the surface quality of the final parts. In recent years, an increasing number of post-processing treatments has been developed for the most used materials. Contrarily to other additive manufacturing technologies, metallization is not a common surface treatment for this process despite the increasing range of high-performing 3D printable materials. The objective of this work is to explore the use of physical vapor deposition sputtering for the chromium metallization of thermoplastic polymers and composites obtained by fused filament fabrication. The thermal and mechanical properties of five materials were firstly evaluated by means of differential scanning calorimetry and tensile tests. Meanwhile, a specific finishing torture test sample was designed and 3D printed to perform the metallization process and evaluate the finishing on different geometrical features. Furthermore, the roughness of the samples was measured before and after the metallization, and a cost analysis was performed to assess the cost-efficiency. To sum up, the metallization of five samples made with different materials was successfully achieved. Although some 3D printing defects worsened after the post-processing treatment, good homogeneity on the finest details was reached. These promising results may encourage further experimentations as well as the development of new applications, i.e., for the automotive and furniture fields.

Despite the growing global interest in 3D printed carbon fiber reinforced polymers, most of the applications are still limited to high-performance sectors due to the low effectiveness–cost ratio of virgin carbon fibers. However, the use of recycled carbon fibers in 3D printing is almost unexplored, especially for thermoset-based composites. This paper aims to demonstrate the feasibility of recycled carbon fibers 3D printing via UV-assisted direct ink writing. Pyrolyzed recycled carbon fibers with a sizing treatment were firstly shredded to be used as a reinforcement of a thermally and photo-curable acrylic resin. UV-differential scanning calorimetry analyses were then performed to define the material crosslinking of the 3D printable ink. Because of the poor UV reactivity of the resin loaded with carbon fibers, a rheology modifier was added to guarantee shape retention after 3D printing. Thanks to a customized 3D printer based on a commercial apparatus, a batch of specimens was successfully 3D printed. According to the tensile tests and Scanning Electron Microscopy analysis, the material shows good mechanical properties and the absence of layer marks related to the 3D printing. These results will, therefore, pave the way for the use of 3D printed recycled carbon fiber reinforced polymers in new fields of application.

Within the complex framework of additive manufacturing, direct ink writing (DIW) processes significantly contribute to extending the range of 3D‐printable materials (i.e., thermosetting resins, ceramics, hydrogels). Thanks to this technology, viscous inks are easily extruded for the creation of 3D structures. Nevertheless, the quick recovery of the solid‐like behavior after extrusion remains one of the most crucial open issues for 3D‐printable inks. The main goal herein is to improve the printability of a UV‐curable thermosetting composite ink reinforced with mechanically recycled glass fiber composites by modifying its rheological behavior. The overall process is optimized, leading to the definition of the optimal extrusion parameters for these types of materials. Furthermore, the retraction mode is successfully developed for the DIW of recycled composites. Additional features are achieved, thanks to the aforementioned improvements, such as 3D complex shapes, assembled pieces, and/or moving built‐in mechanisms, increasing the number of new potential applications of recycled glass fiber‐reinforced polymers.

No abstract

No abstract