The combination of natural fibers and renewable source matrices is an option to replace materials from non-renewable sources used in the manufacture of composites. One example is the use of pinus sawdust and sisal fibers together with a matrix of polyurethane (PU) foam derived from vegetable oils. For the application of composites in sectors such as building or furniture industry, one of the necessary processes is drilling, which allows assembling through different fastening systems. The aim of this work is to investigate the drilling process of the composites of PU foam derived from vegetable oils matrix with only pinus sawdust and hybrid pinus sawdust and sisal fibers taking into account surface damages of the holes and temperature generated during the process. Results showed that drilling parameters influence on the generation of damages mainly at the edges of the holes. Lower cutting speed and feed rate were most appropriate for drilling these types of composites, and temperatures generated during drilling showed relationship with the generation of damages.
O uso de recursos naturais não renováveis e a destinação de resíduos de processos agrícolas ou industriais tem levado pesquisadores ao desenvolvimento de novos materiais como os compósitos, que podem levar em sua composição as fibras naturais. A bananeira é uma planta cultivada ao redor do mundo e suas fibras podem ser utilizadas em compósitos. Este trabalho tem como objetivo buscar na literatura trabalhos sobre o desenvolvimento de compósitos obtidos a partir da utilização da fibra de bananeira com diferentes matrizes poliméricas, suas formas de preparação, caracterização mecânica, usinabilidade e utilização do material. Investigar a viabilidade como material comercial e incentivar o aproveitamento do resíduo do cultivo da planta também são os objetivos deste trabalho
As indústrias de mobilidade travam uma busca contínua para novas tecnologias objetivando redução de custos e maximização de desempenho. Neste contexto, a otimização da relação peso-consumo é crucial e há uma crescente inserção de fibras naturais e compósitos na redução de massa dos produtos. As indústrias aeronáutica, náutica e principalmente a automobilística, já fazem uso destas tecnologias e o uso de fibras e compósitos são uma das maneiras de melhorar a eficiência energética, mantendo-se os quesitos de sustentabilidade. A indústria automobilística é o nicho onde mais se investe nas novas tecnologias, face à sua grande produção e representatividade mundial e, especificamente no Brasil, foi criado o programa Rota 2030 com o objetivo de incentivar as empresas automobilísticas a investirem em desenvolvimento tecnológico, inovação, segurança veicular e proteção ao meio ambiente. Os resultados indicam que o uso de fibras naturais e de compósitos tende a aumentar em breve, face às suas qualidades em substituir os materiais convencionais que são, muitas vezes, oriundos de fontes não renováveis.
Natural fibers composites obtained from waste of agricultural processes appear as an alternative to materials from non-renewable sources. Drilling these composites is challenging due to the non-homogeneous structure and behavior of the natural fibers and the polymeric matrix. This work uses different drill types and machining parameters to investigate the drilling process in a composite with banana stem fibers and polyurethane derived from castor oil. Hole damages, thrust force, torque and chip morphology were evaluated. The best results were found using a twist drill at 19 m/min cutting speed and 0.1 mm/rev feed rate. Drill type was the main factor in generating damage in the holes, while torque and thrust force were less influential.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.