The design of a DEMO reactor requires the design of a blanket system suitable of reliable T production and heat extraction for electricity production. In the frame of the EUROfusion Consortium activities, the Breeding Blanket Project has been constituted in 2014 with the goal to develop concepts of Breeding Blankets for the EU PPPT DEMO; this includes an integrated design and R&D program with the goal to select after 2020 concepts on fusion plants for the engineering phase. The design activities are presently focalized around a pool of solid and liquid breeder blanket with helium, water and PbLi cooling. Development of tritium extraction and control technology, as well manufacturing and development of solid and PbLi breeders are part of the Programme.

The water-cooled lithium-lead breeding blanket is in the pre-conceptual design phase. It is a candidate option for European DEMO nuclear fusion reactor. This breeding blanket concept relies on the liquid lithium-lead as breeder-multiplier, pressurized water as coolant and EUROFER as structural material. Current design is based on DEMO 2017 specifications. Two separate water systems are in charge of cooling the first wall and the breeding zone: thermo-dynamic cycle is 295-328°C at 15.5 MPa. The breeder enters and exits from the breeding zone at 330°C. Cornerstones of the design are the single module segment approach and the water manifold between the breeding blanket box and the back supporting structure. This plate with a thickness of 100mm supports the breeding blanket and is attached to the vacuum vessel. It is in charge to withstand the loads due to normal operation and selected postulated initiating events. Rationale and progresses of the design are presented and substantiated by engineering evaluations and analyses. Water and lithium lead manifolds are designed and integrated with the two consistent primary heat transport systems, based on a reliable pressurized water reactor operating experience, and six lithium lead systems. Open issues, areas of research and development needs are finally pointed out.

No abstract

No abstract

The Water-Cooled Lead–Lithium Breeding Blanket (WCLL BB) is one of the two blanket concept candidates to become the driver blanket of the EU-DEMO reactor. The design was enacted with a holistic approach. The influence that neutronics, thermal-hydraulics (TH), thermo-mechanics (TM) and magneto-hydro-dynamics (MHD) may have on the design were considered at the same time. This new approach allowed for the design team to create a WCLL BB layout that is able to comply with different foreseen requirements in terms of integration, tritium self-sufficiency, and TH and TM needs. In this paper, the rationale behind the design choices and the main characteristics of the WCLL BB needed for the EU-DEMO are reported and discussed. Finally, the main achievements reached during the pre-conceptual design phase and some remaining open issues to be further investigated in the upcoming conceptual design phase are reported as well.

The water-cooled lithium–lead breeding blanket is a candidate option for the European Demonstration Power Plant(DEMO) nuclear fusion reactor. This breeding blanket concept relies on the liquid lithium– lead as breeder–multiplier,pressurized water as coolant, and EUROFER as structural material. The current design is based on DEMO 2015specifications and represents the follow-up of the design developed in 2015. The single-module-segment approach isemployed. This is constituted by a basic geometry repeated along the poloidal direction. The power is removed by meansof radial–toroidal (i.e., horizontal) water cooling tubes in the breeding zone. The lithium–lead flows in a radial–poloidaldirection. On the back of the segment, a 100-mm-thick plate is in charge of withstanding the loads due to normal operationand selected postulated initiating events. Water and lithium–lead manifolds are designed and integrated with a consistentprimary heat transport system, based on a reliable pressurized water reactor operating experience, and the lithium–leadsystem. Rationale and features of the single-module-segment water-cooled lithium–lead breeding blanket design arediscussed and supported by thermo-mechanic, thermo-hydraulic, and neutronic analyses. Preliminary integration withthe primary heat transfer system, the energy storage system, and the balance of plant is briefly discussed. Open issues, areasof research, and development needs are finally pointed out

No abstract

No abstract