Este trabalho visa à aplicação do método assimétrico numérico livre de malha, um tipo de Meshless, em dois casos de fluxo hídrico subterrâneo para simular a variação da carga hidráulica da região. O modelo desenvolvido utiliza a função de base radial multiquádrica como função de aproximação e uma nova metodologia, a qual utiliza os resíduos do contorno e do domínio para determinar o parâmetro de forma ‘c’, usado nesse Meshless. A metodologia foi aplicada em dois casos: Para o Caso 1, com solução analítica conhecida, foi possível comparar a solução exata à solução numérica obtida usando a metodologia dos resíduos proposta. O Caso 2 é um cenário real no qual a metodologia foi aplicada para simular o fluxo hídrico subterrâneo de uma pequena região dentro da Bacia Sedimentar do Araripe, situada no Estado do Ceará-Brasil. Nessa região específica a maior parte do abastecimento público de água provém de fontes subterrâneas. No caso 1, os resultados indicaram que o parâmetro ‘c’ obtido se aproximou do valor ideal. No caso 2, a equipotencial do poço utilizado como referência obteve um erro percentual de aproximadamente 5%.
The main objective of this research is the development of a new formulation for calibration of the head loss universal equation friction factor using the Alternative Hydraulic Gradient Iterative Method for calculating the absolute roughness. The method was applied with the aid of Epanet2.dll library for hydraulic simulations in two fictitious distribution networks. The influence of the initial roughness adopted, the number of nodes with known pressure data and position of the nodes with known pressures was tested. To test the influence of the initial roughness to be adopted a computer subroutine has been developed in order to calculate the most appropriate initial roughness for each section. The results showed that it is recommended to use as starting absolute roughness the usual value for the pipe material as new. The developed computational subroutine is recommended for unknown pipes network material or very old networks. How higher number of known pressures in the distribution network, better the accuracy of the method. However, a good layout of the nodes with known pressures was more important than a large number of pressure measurements. The best configuration found to the nodes with known pressures they were separated compared setting together with each other. The method was simple to apply and with good results, and can be applied with a small number of iterations.
Direitos para esta edição cedidos à Atena Editora pelos autores.Todo o conteúdo deste livro está licenciado sob uma Licença de Atribuição Creative Commons.Atribuição-Não-Comercial-NãoDerivativos 4.0 Internacional (CC BY-NC-ND 4.0). O conteúdo dos artigos e seus dados em sua forma, correção e confiabilidade são de responsabilidade exclusiva dos autores, inclusive não representam necessariamente a posição oficial da Atena Editora. Permitido o download da obra e o compartilhamento desde que sejam atribuídos créditos aos autores, mas sem a possibilidade de alterá-la de nenhuma forma ou utilizá-la para fins comerciais. Todos os manuscritos foram previamente submetidos à avaliação cega pelos pares, membros do Conselho Editorial desta Editora, tendo sido aprovados para a publicação com base em critérios de neutralidade e imparcialidade acadêmica.A Atena Editora é comprometida em garantir a integridade editorial em todas as etapas do processo de publicação, evitando plágio, dados ou resultados fraudulentos e impedindo que interesses financeiros comprometam os padrões éticos da publicação. Situações suspeitas de má conduta científica serão investigadas sob o mais alto padrão de rigor acadêmico e ético.
O uso de reservatórios de detenção tem sido uma das opções adotadas para mitigar os impactos da urbanização sobre o sistema de drenagem urbana. Seu dimensionamento, geralmente, é baseado em uma única equação empírica, em função da área impermeável, desenvolvida a partir da média das características de diferentes bacias hidrográficas. O presente trabalho traz equações que estimam o volume do reservatório de detenção na cidade de Teresina-PI, incorporando, além da área impermeável, a largura específica, a declividade e o CN para cada uma das 70 sub-bacias hidrográficas urbanas. Os resultados indicam que a heterogeneidade entre as características das bacias influencia diretamente no volume requerido ao reservatório. O volume estimado a partir da equação vigente na legislação municipal resulta em valores superestimados, tornando a execução do reservatório mais onerosa e dificultando sua aplicabilidade, demonstrando-se, desse modo, a necessidade de readaptação da mesma.
Palavras-chave: Drenagem Urbana. Reservatório de detenção. Características da bacia.
A detecção de vazamentos em redes de abastecimento é de suma importância para combater o desperdício de água potável, assim como melhorar a eficiência dos sistemas de distribuição de água. Neste trabalho foi desenvolvida uma rotina, utilizando como base o Método do Gradiente Hidráulico Alternativo (MIGHA), para calibrar as vazões de uma rede e posteriormente utilizar os resultados da calibração para detectar possíveis pontos de vazamentos. Os resultados obtidos mostram que o método consegue identificar os nós e os trechos onde os vazamentos possam estar localizados. Em relação ao cálculo da localização dos vazamentos nos trechos, os resultados foram satisfatórios quando o vazamento não possuía influência de outros vazamentos próximos.
Palavras-chave: Calibração. Vazamentos. MIGHA.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.