O mecanismo geral para a fotodegradação do polietilenoglicol (PEG) usando o sistema H 2 O 2 /UV foi determinado por GPC e HPLC, analisando o comportamento de moléculas modelo, como por exemplo os etilenoglicóis de baixa massa molar (tetra-, tri-, di-, e etilenoglicol). Após 30 min de irradiação, a massa molar ponderal média (M w ) do PEG degradado, analisada por GPC, cai para metade do seu valor inicial com um aumento concomitante na polidispersidade e número médio de quebra de cadeia (S). Essa queda acentuada caracteriza uma quebra de cadeia aleatória, formando oligômeros e etilenoglicóis de menor massa molar. A análise da fotodegradação de etilenoglicóis modelo por HPLC permitiu sugerir um mecanismo que envolve processos consecutivos, em que etilenoglicóis maiores originam menores, sucessivamente. A fotodegradação do etilenoglicol formou ácidos carboxílicos de baixa massa molar, como por exemplo os ácidos glicólico, oxálico e fórmico.The general mechanism for the photodegradation of polyethyleneglycol (PEG) by H 2 O 2 /UV was determined studying the photooxidation of small model molecules, like low molecular weight ethyleneglycols (tetra-, tri-, di-, and ethyleneglycol). After 30 min of irradiation the average molar mass (M w ) of the degradated PEG, analysed by GPC, fall to half of its initial value, with a concomitant increase in polydispersitivity and number of average chain scission (S), characterizing a random chain scission process yielding oligomers and smaller size ethyleneglycols. HPLC analysis of the photodegradation of the model ethyleneglycols proved that the oxidation mechanism involved consecutive reactions, where the larger ethyleneglycols gave rise, successively, to smaller ones. The photodegradation of ethyleneglycol lead to the formation of low molecular weight carboxylic acids, like glycolic, oxalic and formic acids.

No abstract

No abstract

No abstract

No abstract

No abstract

No abstract

The organoclay/poly(methyl methacrylate) (PMMA) nanocomposites were prepared by in situ photopolymerization method using two solvents, ethanol and acetonitrile. The influences of organoclay loading, solvent nature and length of attached surfactant (C8 or C16) on thermal and mechanical properties were studied by thermogravimetric analysis and dynamic mechanical analysis. Alkylammonium surfactants with C8 and C16 chain lengths were evaluated as clay modifiers. All the nanocomposites prepared in acetonitrile exhibited improvement in their thermal stability, mainly due to the interaction between the clay and the polymer which is maximized by the exfoliated clay structure. In the case of PMMA and nanocomposites synthesized in ethanol, the thermal stability of polymer and nanocomposites remained practically the same once the clay structure is predominantly of the intercalated type. In comparison with pure PMMA, glass transition temperature and storage modulus of polymer are notably increased by the presence of clay. It was found that the chain length of surfactant attached to the SWy-1 clay affects the Tg values. Glass transition temperatures of nanocomposites SWy-1-C16/PMMA were significantly higher than the values obtained for nanocomposites SWy-1-C8/ PMMA. This can be attributed to the modifying agent C16, which has a greater hydrophobic chain length. The organic tail can provide a better dispersion of the MMA monomer in the organoclay, resulting in a nanocomposite with predominant exfoliated structure. Another significant factor to be considered was the effect of solvent used in the nanocomposite preparation. Considering nanocomposites with the same chain length (C8 or C16), Tg values obtained for nanocomposites prepared with ethanol is higher than those observed for those prepared in acetonitrile. This was attributed to the influence of the average molecular weight; once the nanocomposites prepared in ethanol exhibited higher polymeric chains.