A post-lithium battery era is envisaged, and it is urgent to find new and sustainable systems for energy storage. Multivalent metals, such as magnesium, are very promising to replace lithium, but the low mobility of magnesium ion and the lack of suitable electrolytes are serious concerns. This review mainly discusses the advantages and shortcomings of the new rechargeable magnesium batteries, the future directions and the possibility of using solid electrolytes. Special emphasis is put on the diversity of structures, and on the theoretical calculations about voltage and structures. A critical issue is to select the combination of the positive and negative electrode materials to achieve an optimum battery voltage. The theoretical calculations of the structure, intercalation voltage and diffusion path can be very useful for evaluating the materials and for comparison with the experimental results of the magnesium batteries which are not hassle-free.

A new electrochemical procedure to explore the intercalation of magnesium using a concentration cell with two cubic spinels Mg1−xMn2O4.

No abstract

Magnetite nanoparticles (Fe3O4) functionalized with graphene oxide (GO) have been synthesized through a silanization process of the magnetic nanoparticles with tetraethyl orthosilicate and (3-aminopropyl)triethoxysilane and further coupling of GO. The synthesized nanomaterials have been characterized by several techniques, such as transmission electron microscopy (TEM), and infrared and Raman spectroscopy, which enabled the evaluation of the different steps of the functionalization process. The hybrid nanomaterial has been employed for the extraction of five benzophenones (benzophenone-1, benzophenone-3, 4-hydroxybenzophenone, benzophenone-6 and benzophenone-8) in aqueous samples by dispersive micro-solid phase extraction, combining the magnetic properties of magnetite nanoparticles with the excellent sorption capacity of graphene oxide via hydrophobic interactions with the analytes. The subsequent separation and quantification of the analytes was performed by liquid chromatography with tandem mass spectrometric detection, achieving limits of detection (LODs) in the range 2.5 to 8.2 μg·L−1, with relative standard deviations ranging from 1.3–9.8% and relative recovering in the range 86 to 105%. Positive swimming pool water samples analysed following the developed method revealed the presence of benzophenones in from 14.3 to 39 μg·L−1.

Rechargeable magnesium batteries attract lots of attention because of their high safety and low cost compared to lithium batteries, and it is needed to develop more efficient electrode materials. Although MgMn 2 O 4 is a promising material for the positive electrode in Mg rechargeable batteries, it usually exhibits poor cyclability. To improve the electrochemical behavior, we have prepared nanoparticles of MgMn 2-y Fe y O 4 . The XRD results have confirmed that when Mn 3 + (Jahn-Teller ion) ions are replaced by Fe 3 + (non-Jahn-Teller ion), the resulting MgMn 2-y Fe y O 4 is a cubic phase. The structure and theoretical voltage are theoretically calculated by using the DFT method. The obtained samples have been chemically treated in acid solution for partial demagnesiation, and it is observed that the presence of iron inhibits the deinsertion of Mg through disproportionation and favors the exchange reaction. The electrochemical behavior in nonaqueous magnesium cells has been explored.