The ecological transition is a process the building industry is bound to undertake. This study aimed to develop new bio-based building partition typologies and to determine if they are suitable ecological alternatives to the conventional non-renewable ones used today. This work started with the development of a bio-based epoxy composite board and a waste-based sheep wool acoustic absorbent. Six different partition typologies combining conventional and bio-based materials were analyzed. A drywall partition composed of gypsum plasterboard and mineral wool was used as the baseline. First, a cradle-to-gate life cycle assessment was performed to compare their environmental impacts. Secondly, a mathematical simulation was performed to evaluate their airborne acoustic insulation. The LCA results show a 50% decrease in the amount of CO2 equivalent emitted when replacing plasterboard with bio-composite boards. The bio-composites lower the overall environmental impact by 40%. In the case of the acoustic absorbents, replacing the mineral wool with cellulose or sheep wool decreases the carbon emissions and the overall environmental impact of the partition from 4% and 6%, respectively. However, while the bio-based acoustic absorbents used offer good acoustic results, the bio-composites have a lower airborne acoustic insulation than conventional gypsum plasterboard.

No abstract

Abstract-Recently, many educational institutions have acknowledged the importance of making laboratories available on-line, allowing their students to run experiments from a remote computer. While usage of virtual laboratories scales well, remote experiments, based on scarce and expensive rigs, i.e. physical resources, do not and typically can only be used by one person or cooperating group at a time. It is therefore necessary to administer the access to rigs, where we distinguish between three different roles: content providers, teachers and students.This paper reports on a conceptual model and technical design of a rig booking system that provides mechanisms for content providers and teachers to control and grant access to on-line remote laboratories. The design of the booking system is based on a requirements analysis carried out by the EC funded LiLa project in cooperation with international partners from the Global Online Lab Consortium, GoLC.

No abstract

Hospitals generate huge amounts of nonwoven residues daily. This paper focused on studying the evolution of nonwoven waste generated in the Francesc de Borja Hospital, Spain, over the last few years and its relation to the COVID-19 pandemic. The main objective was to identify the most impacting pieces of nonwoven equipment in the hospital and to analyze possible solutions. The carbon footprint of the nonwoven equipment was studied through a life-cycle assessment. The results showed an apparent increase in the carbon footprint in the hospital from 2020. Additionally, due to the higher annual volume, the simple nonwoven gown used primarily for patients had a higher carbon footprint over a year than the more sophisticated surgical gowns. It can be concluded that developing a local circular economy strategy for medical equipment could be the solution to avoid the enormous waste generation and the carbon footprint of nonwoven production.