While it is generally acknowledged that dross generation should be kept to a minimum, too often, the importance of maximising the aluminium content of the dross is overlooked. Some mistakenly believe that a low metal content is a good thing and that the aluminium is being kept in the furnace. In reality, this metal is most likely being lost due to insufficient cooling and thermiting. Much can be gleaned from looking at the dross that is generated in a casthouse; in fact, the quality of dross can provide a good indication of the overall efficiency of the operation. Even with the very low aluminium prices of today, of circa. US$1400 per tonne, a reduction in dross generation within the furnace can provide huge savings per year. Effective dross management also results in better metal quality, improved fuel efficiency, prolonged refractory life and improved yield in the entire facility. This paper will look at how dross is generated within the furnace in the first place, followed by ways to minimize the dross generation within the furnace using continuous and sub-surface circulation which can also provide significant energy and CO2 reductions. A separate paper will discuss dross processing options and possibilities. In summary, by careful attention to the equipment and process techniques around the furnace and the follow-on dross management significant cost savings and environmental benefits can be realized by cast house operations.
Electromagnetic stirring in aluminium melting and holding furnaces is widely introduced and accepted throughout the aluminium industry but this paper looks to discuss some of the differentiating factors that have allowed the air-cooled MHD technology to provide effective circulation of the molten metal in furnaces when applied to the side of the melting furnace (rather than the traditional bottom-mounted location). This technology has been installed by Constellium and we discuss some of the benefits that have been experienced from the various installations. As well as providing certain key operational benefits this new technology allows for low-energy use and has removed many of the inherent risks of the older water-cooled technology in proximity to aluminium.
While it is generally acknowledged that dross generation should be kept to a minimum, too often the importance of maximizing the aluminium content of the dross is overlooked. Some mistakenly believe that a low metal content is a good thing and that the aluminium is being kept in the furnace. In reality, this metal is most likely being lost due to insufficient cooling and thermiting. Much can be gleaned from looking at the dross that is generated in a casthouse; in fact, the quality of dross can provide a good indication of the overall efficiency of the operation. Even with the very low aluminium prices of today of about US$1400 per tonne, a recovery improvement of just 3% for a facility producing 500t of dross per month can provide savings in excess of $250.000 per year. Effective dross management also results in better metal quality, improved fuel efficiency, prolonged refractory life and improved profitability in the entire facility. Over the years, as facilities have focused on better dross cooling and handling techniques, dross recoveries have improved. Today, dross recoveries should be in the range of 60 – 70%. These numbers will raise debate but 30 years of experience give us deep insight into these results. The paper looks at the different techniques of handling the dross that is produced within the melting/casting operation with the objective of maximizing aluminium recovery. This paper will consider both the initial dross handling within the cast house but then also how secondary processors should be evaluated to maximize the value of the dross being processed. A company can lose as much dross recovery opportunity here as in their own facility. . In summary, by careful attention to the equipment and process techniques around the furnace and the follow-on dross management, significant cost savings and environmental benefits can be realized by cast house operations.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.