In organic synthesis, the composition and structure of products are predetermined by the reaction conditions; however, the synthesis of well-defined inorganic nanostructures often presents a significant challenge yielding non-stoichiometric or polymorphic products. In this study, confinement in the nanoscale cavities of single-walled carbon nanotubes (SWNT) provides a new approach for multi-step inorganic synthesis where sequential chemical transformations take place within the same nanotube. In the first step, SWNT donate electrons to the reactant iodine molecules (I2) transforming them to iodide anions (I -). These then react with metal hexacarbonyls (M(CO)6, M = Mo or W) in the next step yielding anionic nanoclusters [M6I14] 2-, the size and composition of which are strictly dictated by the nanotube cavity, as demonstrated by aberration corrected high resolution transmission electron microscopy (AC-HRTEM), scanning transmission electron microscopy (STEM) and energy dispersive X-ray (EDX) spectroscopy. Atoms in the nanoclusters [M6I14] 2-are arranged in a perfect octahedral geometry and can engage in further chemical reactions within the nanotube, either reacting with each other leading to a new polymeric phase of molybdenum iodide [Mo6I12]n, or with hydrogen sulphide gas giving rise to nanoribbons of molybdenum/tungsten disulphide [MS2]n in the third step of the synthesis. Electron microscopy measurements demonstrate that the products of the multi-step inorganic transformations are precisely controlled by the SWNT nanoreactor, with complementary Raman spectroscopy revealing the remarkable property of SWNT to act as a reservoir of electrons during the chemical transformation. The electron transfer from the hostnanotube to the reacting guest-molecules is essential for stabilising the anionic metal iodide 2 nanoclusters and for their further transformation to metal disulphide nanoribbons synthesised in the nanotubes in high yield.Keywords: Carbon Nanotube, Charge Transfer, Nanoparticle, Nanoreactor, Nanoribbon Single-walled carbon nanotubes (SWNT) are among the most effective and universal containers for molecules. Provided that the internal diameter of the host-nanotube is wider than the critical diameter of the guest-molecule, the insertion of molecules into SWNT is spontaneous and, in some cases, such as fullerenes and their derivatives, irreversible due to the ubiquitous van der Waals forces dominating the host guest interactions between the nanotube and molecules [1]. Fullerenes [2,3] or organic molecules [4][5][6][7][8][9][10] encapsulated in SWNT can then be triggered to react inside the nanotube to form unusual oligomers and polymers [11][12][13], graphene nanoribbons [14][15][16], nanotubes [8,17] or extraordinary molecular nanodiamonds [9]. These examples clearly demonstrate the use of SWNT as nanoscale chemical reactors, where the structure of the macromolecular product can be precisely controlled by spatial confinement of the reactions in the nanotube channel.In contrast to organic molecules,...

Catalysis of chemical reactions by nanosized clusters of transition metals holds the key to the provision of sustainable energy and materials. However, the atomistic behaviour of nanocatalysts still remains largely unknown due to uncertainties associated with the highly labile metal nanoclusters changing their structure during the reaction. In this study, we reveal and explore reactions of nm-sized clusters of 14 technologically important metals in carbon nano test tubes using time-series imaging by atomically-resolved transmission electron microscopy (TEM), employing the electron beam simultaneously as an imaging tool and stimulus of the reactions. Defect formation in nanotubes and growth of new structures promoted by metal nanoclusters enable the ranking of the different metals both in order of their bonding with carbon and their catalytic activity, showing significant variation across the Periodic Table of Elements. Metal nanoclusters exhibit complex dynamics shedding light on atomistic workings of nanocatalysts, with key features mirroring heterogeneous catalysis.

Carbonyl complexes of transition metals (M x (CO) y , where x ¼ 1, 2, or 3 and y ¼ 6, 10, or 12 for M ¼ W, Re, or Os, respectively) inserted into single walled carbon nanotubes (SWNT, diameter 1.5 nm) transform into metallic nanoparticles (MNPs) under heat treatment or electron beam irradiation. The host-nanotube acts as an efficient template, controlling the growth of MNPs to $1 nm in diameter. The only co-product of nanoparticle formation, carbon monoxide (CO) gas, creates pockets of high pressure between nanoparticles, thus preventing their collision and coalescence into larger structures. As a result, the MNPs stay largely spheroidal in shape and are uniformly distributed throughout the entire length of the SWNT. Despite their extremely small size (on average each MNP contains 30-90 atoms) and no protection of their surface by a capping layer of molecules, the metallic nanoparticles encapsulated in nanotubes are very stable under ambient conditions and even at elevated temperatures. Aberration-corrected high-resolution transmission electron microscopy reveals the crystalline nature of the MNPs, probes their interactions with the nanotube interior and illustrates the complex dynamics of confined MNPs in real-time and direct-space.

For carbon nanotubes filled with fullerenes (''peapods''), it is a key issue to find an analytical method that distinguishes the molecules inside the nanotube from those adsorbed on its surface. High-resolution transmission electron microscopy (HRTEM) detects both encapsulated and adsorbed molecules which are large enough (e.g., fullerenes), but being a localprobe method, it cannot be applied to large amounts of sample. In Raman spectroscopy, the empirical rules for line shifts and splitting are nanotube-type dependent and often ambiguous. We prepared C 60 peapods by nano-extraction using supercritical CO 2 as a solvent, and subsequently removed the adsorbed fullerene molecules by washing the samples. We analyzed the samples by the combination of HRTEM, Raman, and midinfrared attenuated total reflectance (MIR-ATR) spectroscopy. Although the TEM images proved that the nanotubes were filled with fullerenes, we did not observe any shift in the fullerene's A g (2) Raman mode compared to C 60 crystals. ATR spectra, on the other hand, were found to detect only the adsorbed molecules. Therefore, the combination of the two methods provide good basis for determining the success of nanotube filling by spectroscopy alone.

The preparation of inorganic nanomaterials with a desired structure and specific properties requires the ability to strictly control their size, shape and composition. A series of chemical reactions with platinum compounds carried out within the 1.5 nm wide channel of single-walled carbon nanotubes (SWNTs) have demonstrated the ability of SWNTs to act as both a very effective reaction vessel and a template for the formation of nanocrystals of platinum di-iodide and platinum di-sulphide, materials that are difficult to synthesise in the form of nanoparticles by traditional synthetic methods. The stepwise synthesis inside nanotubes has enabled the formation of Pt compounds to be monitored at each step of the reaction by aberration-corrected high resolution transmission electron microscopy (AC-HRTEM), verifying the atomic structures of the products, and by an innovative combination of fluorescence-detected X-ray absorption spectroscopy (FD-XAS) and Raman spectroscopy, monitoring the oxidation states of the platinum guest-compounds within the nanotube and the vibrational properties of the host-SWNT, respectively. This coupling of complementary spectroscopies reveals that electron transfer between the guest-compound and the host-SWNT can occur in either direction depending on the composition and structure of the guest. A new approach for nanoscale synthesis in nanotubes developed in this study utilises the versatile coordination chemistry of Pt which has enabled the insertion of the required chemical elements (e.g. metal and halogens or chalcogens) into the nanoreactor in the correct proportions for the controlled formation of PtI and PtS with the correct stoichiometry.

Coronene was encapsulated in single-walled carbon nanotubes (SWNT) by vapor-phase filling at high (450 8C) and low (385 8C) temperature and by nanoextraction from supercritical carbon dioxide. The presence of coronene inside the tubes was demonstrated indirectly via the formation of double-walled nanotubes (DWNT). To this end several subsequent annealing steps were applied and monitored by Raman spectroscopy. Our results show that the encapsulation is successful with all three methods. However, high-temperature vapor filling produces adsorbed dicoronylene, the dimerized form of coronene, as a side reaction. In order to avoid dicoronylene contamination, we suggest to use low-temperature methods for the production of coronene-filled carbon nanotubes.Coronene (top) and dicoronylene (bottom) molecules.

One of the most exciting properties of carbon nanotubes is their ability to encapsulate molecular species in their quasi-one dimensional channels. We present results on single-walled carbon nanotubes filled with ferrocene, the most stable and commercially available metallocene. For encapsulation of the ferrocene molecules we attempted two types of filling: a high temperature vapor-phase method and nano-extraction from ethanol. To confirm the encapsulation, double-walled carbon nanotubes were created from the samples by annealing. The inner tubes could be detected by Raman scattering via their radial breathing mode. These experiments confirmed that only the high-temperature annealing method was successful. The product was characterized by infrared attenuated total reflection (IR-ATR), Raman, ultraviolet-visible (UV-VIS) and Mössba-uer spectroscopy. By the latter method other iron-containing phases were observed. Mössbauer spectra proved that no charge transfer occurs between the nanotube and the ferrocene molecules.

No abstract