No abstract

No abstract

Metallic materials are used for clinical medical devices such as vascular stents and coils to treat both ischemic and hemorrhagic vascular diseases. An antiplatelet drug is required to avoid thromboembolic complication until metallic surface is covered with a neo-endothelial cell layer. It is important to identify endothelial cell coverage on the metallic surface. However, it is difficult since there are no selective ligands. Here, we used the phage display method to identify peptide ligands that had high affinity for the metallic surface of Ni−Ti stents, Pt−W coils, and Co−Cr stents. The binding assay using fluorescence labeling revealed that several synthetic peptides could bind onto those surfaces. We also chose some oligopeptides for the conjugation onto superparamagnetic iron oxide (SPIO) nanoparticles and liposome-encapsulating SPIO nanoparticles and studied their ability to bind to the stent and coils. By SEM and fluorophotometry, we found that those modified SPIOs and liposomes were selectively bound onto those surfaces. In addition, both treated stents and coils could be detected by magnetic resonance imaging due to the magnetic artifact through the SPIOs and liposomes that were immobilized onto the surface. Thus, we identified metal-binding peptides which may enable to stop antiplatelet therapy after vascular stenting or coiling.

Since circulating tumor cells (CTCs) are tumor cells which are found in the blood of cancer patients, CTCs are potential tumor markers, so a rapid isolation of CTCs is desirable for clinical applications. In this paper, a three-dimensional polystyrene (PS) microfiber fabric with vacuum aspiration system was developed for capturing CTCs within a short time. Various microfiber fabrics with different diameters were prepared by the electrospinning method and optimized for contact frequency with cells. Vacuum aspiration utilizing these microfiber fabrics could filter all cells within seconds without mechanical damage. The microfiber fabric with immobilized anti-EpCAM antibodies was able to specifically capture MCF-7 cells that express EpCAM on their surfaces. The specificity of the system was confirmed by monitoring the ability to isolate MCF-7 cells from a mixture containing CCRF-CEM cells that do not express EpCAM. Furthermore, the selective capture ability of the microfiber was retained even when the microfiber was exposed to the whole blood of pigs spiked with MCF-7 cells. The specific cell capture ratio of the vacuum aspiration system utilizing microfiber fabric could be improved by increasing the thickness of the microfiber fabric through electrospinning time.

Biosensing devices such as assays require both speed and sensitivity as two integral components for its effectiveness. Within this review, developed three-dimensional (3D) microfiber polystyrene (PS) platforms are leveraged to introduce a means for effectively rapid and sensitive assays. Considered broadly, the 3D structure contributes to an increased surface area for antibody immobilization while the natural hydrophobic nature of PS promotes this immobilization for immunoassay diagnostics. More specifically, rapid antigen capture can be realized by combining this platform with vacuum pressure to mitigate diffusion limitations for antibody-antigen interactions. Alternatively, the increased antibody immobilization density can realize the selective capture and release of circulating tumor cells (CTC). Through both low concentration CTC capture and effective release of said cells, patient-specific cancer care can be achieved.

No abstract