No abstract

Alginate (Alg) hydrogels are commonly used as bioinks in 3D bioprinting. However, one of the significant drawbacks of using Alg hydrogels is their unstable mechanical properties. In this study, a novel hydrogel-based ink composed of Alg reinforced with functionalised boron nitride nanotubes (f-BNNTs) was developed and systematic quantitative characterisation was conducted to validate its printability, physiochemical properties and biocompatibility. The printability, contact angle and mechanical test results indicated good structural stability of the scaffolds. The thermal stability of the scaffolds increased with the incorporation of f-BNNTs into Alg. Human embryonic kidney cells (HEK 293T) were seeded on the scaffolds and the cell viability was recorded for 24, 48 and 72 h. Quantitative studies showed a slight effect on toxicity with a higher concentration of BNNTs in scaffolds. The results suggest that the 3D printable f-BNNTs reinforced Alg could be used as bioink for tissue engineering applications with further studies on biocompatibility.

Boron nitride nanotubes (BNNTs) are an exciting class of nanomaterials due to their unique chemical and physical characteristics. In recent decades, BNNTs have gained huge attention in research and development for various applications, including as nano-fillers for composites, semiconductor devices, hydrogen storage, and as an emerging material in biomedical and tissue engineering applications. However, the toxicity of BNNTs is not clear, and the biocompatibility is not proven yet. In this review, the role of BNNTs in biocompatibility studies is assessed in terms of their characteristics: cell viability, proliferation, therapeutic outcomes, and genotoxicity, which are vital elements for their prospective use in biomedical applications. A systematic review was conducted utilising the databases Scopus and Web of Science (WOS) (2008–2022). Additional findings were discovered manually by snowballing the reference lists of appropriate reviews. Only English-language articles were included. Finally, the significant analysis and discussion of the chosen articles are presented.

Graphene has gained tremendous attention due to its unlimited potential in various applications while poly(lactic acid) (PLA) is a biodegradable thermoplastic polyester produced from fermenting corn starch. The incorporation of graphene into PLA has been proven to exhibit excellent mechanical and thermal properties. However, there are not many reports on the potential toxic effect of these materials towards living organisms. In this study, we investigated the possible toxicity of graphene and PLA-graphene in a live animal model, the nematode Caenorhabdits elegans (C. elegans). Alive adult worms were exposed directly to graphene and PLA-graphene across a range of concentrations from 50 µg/mL to 1000 µg/mL. After certain hours of exposure, the pharyngeal pumping rate (indicative of the C. elegans feeding activity), reproductive rate and lifespan of the worms were determined and compared to the untreated worm population. At all concentrations tested, both graphene and PLA-graphene do not affect the feeding rate of the nematode. Additionally, there was no significant difference between the lifespan of worms exposed to graphene and PLA-graphene as compared to the untreated control population (p>0.05). We examined the effect of graphene on nematode’s ability to reproduce and no reduction in progenies was detected (p>0.05). Taken together, our findings suggest that graphene and PLA-graphene do not possess a negative effect on the feeding activity, reproduction and overall lifespan of the host, indicating that these materials are safe to living organism at concentration up to 1000 µg/mL.

The use of biodegradable polymers in daily life is increasing to reduce environmental hazards. In line with this, the present study aimed to develop a fully biodegradable polymer composite that was environmentally friendly and exhibited promising mechanical and thermal properties. Bamboo powder (BP)-reinforced polycaprolactone (PCL) composites were prepared using the solvent casting method. The influence of BP content on the morphology, wettability, and mechanical and thermal properties of the neat matrix was evaluated. In addition, the degradation properties of the composites were analysed through soil burial and acidic degradation tests. It was revealed that BP contents had an evident influence on the properties of the composites. The increase in the BP content has significantly improved the tensile strength of the PCL matrix. A similar trend is observed for thermal stability. Scanning electron micrographs demonstrated uniform dispersion of the BP in the PCL matrix. The degradation tests revealed that the biocomposites with 40 wt·% of BP degraded by more than 20% within 4 weeks in the acidic degradation test and more than 5% in the soil burial degradation test. It was noticed that there was a considerable difference in the degradation between the PCL matrix and the biocomposites of PCL and BP. These results suggest that biodegradable composites could be a promising alternative material to the existing synthetic polymer composites.