No abstract

Vicarious calibration approaches using in situ measurements saw first use in the early 1980s and have since improved to keep pace with the evolution of the radiometric requirements of the sensors that are being calibrated. The advantage of in situ measurements for vicarious calibration is that they can be carried out with traceable and quantifiable accuracy, making them ideal for interconsistency studies of on-orbit sensors. The recent development of automated sites to collect the in situ data has led to an increase in the available number of datasets for sensor calibration. The current work describes the Radiometric Calibration Network (RadCalNet) that is an effort to provide automated surface and atmosphere in situ data as part of a network including multiple sites for the purpose of optical imager radiometric calibration in the visible to shortwave infrared spectral range. The key goals of RadCalNet are to standardize protocols for collecting data, process to top-of-atmosphere reflectance, and provide uncertainty budgets for automated sites traceable to the international system of units. RadCalNet is the result of efforts by the RadCalNet Working Group under the umbrella of the Committee on Earth Observation Satellites (CEOS) Working Group on Calibration and Validation (WGCV) and the Infrared Visible Optical Sensors (IVOS). Four radiometric calibration instrumented sites located in the USA, France, China, and Namibia are presented here that were used as initial sites for prototyping and demonstrating RadCalNet. All four sites rely on collection of data for assessing the surface reflectance as well as atmospheric data over that site. The data are converted to top-of-atmosphere reflectance within RadCalNet and provided through a web portal to allow users to either radiometrically calibrate or verify the calibration of their sensors of interest. Top-of-atmosphere reflectance data with associated uncertainties are available at 10 nm intervals over the 400 nm to 1000 nm spectral range at 30 min intervals for a nadir-viewing geometry. An example is shown demonstrating how top-of-atmosphere data from RadCalNet can be used to determine the interconsistency between two sensors.

This paper presents a new method developed for the atmospheric correction of the images that will be acquired by the Venμs satellite after its launch expected in early 2010. Every two days, the Venμs mission will provide 10 m resolution images of 50 sites, in 12 narrow spectral bands ranging from 415 nm to 910 nm. The sun-synchronous Venμs orbit will have a 2-day repeat cycle, and the images of a given site will always be acquired from the same place, at the same local hour, with constant observation angles. Thanks to these characteristics, the directional effects will be considerably reduced since only the solar angles will slowly vary with time.The algorithm that will be implemented for the atmospheric correction of Venμs data is being developed using both radiative transfer simulations and the actual data acquired by the Formosat-2 satellite. Because of its one-day sun-synchronous repeat cycle, Formosat-2 acquires images with a sun-viewing geometry close to the one Venμs will offer. With this geometry, reflectance time series are free from directional effects on the short term, a feature which reduces the number of unknowns to retrieve. The atmospheric corrections algorithm exploits this feature and the two following assumptions: -Aerosol optical properties vary quickly with time but slowly with location.-Surface reflectances vary quickly with location but slowly with time.Consequently, the top of atmosphere reflectance short term variations (10 to 15 days) are mainly due to the variations of aerosol optical properties, and it is thus possible to use these variations to characterise the atmospheric aerosols and to retrieve surface reflectances. This paper first describes the aerosol inversion method we developed and its results when applied to simulations. In the second part, we show the first tests of the method against three data sets acquired by Formosat-2 images with constant observation angles. Aeronet sun photometers measurements were available on all sites. Formosat-2 estimates of optical thickness compare favourably with Aeronet in situ measurements, leading to a noticeable improvement of the smoothness of time series of surface reflectances after atmospheric correction.

No abstract

In partnership with the European Commission and in the frame of the Global Monitoring for Environment and Security (GMES) program, the European Space Agency (ESA) is developing the Sentinel-2 optical imaging mission devoted to the operational monitoring of land and coastal areas. The Sentinel-2 mission is based on a satellites constellation deployed in polar sun-synchronous orbit. Sentinel-2 will offer wide improvements such as a unique combination of global coverage with a wide field of view (290km), a high revisit (5 days with two satellites), a high resolution (10m, 20m and 60m) and multi-spectral imagery (13 spectral bands in visible and shortwave infra-red domains). In this context, the Centre National d'Etudes Spatiales (CNES) supports ESA to define the system image products and to prototype the relevant image processing techniques.

No abstract

No abstract

No abstract