, 95 pages Excessive torque is one of the most important problems in oil/gas drilling industry. Friction between wellbore/casing and drill string causes excessive torque. This study discusses performance analysis of drilling fluid lubricants, which are used as friction reducers in well-bore. Three different types of commercial chemical lubricants, which are fatty acid and glycerid based, triglycerid and vegetable oil based and polypropylene glycol based, diesel oil, and crude oil, which consists of different API gravity, paraffin and asphaltene value samples, were selected for the analysis. In the analysis, different lubricant compositions with the mixture of commercial chemical lubricants, crude oil and diesel oil, which were added to water based lignosulfonate mud, are tested on metal-metal contact surface by Ofite Lubricity Tester to determine the best lubricity/cost ratio of lubricant compositions. v Moreover, effects of the lubricants on mud rheology and API fluid loss of mud, foam forming potential and cheesing/greasing of the lubricants and the influence of mud properties on lubricants (calcium, salt, pH and mud density) are examined.
This paper discusses both technical and project management aspects of drilling fluids services for deepwater and high pressure high temperature (HPHT) offshore drilling projects.
The technical discussion part includes deepwater and HPHT specific fluids related concerns such as logistics, narrow drilling window, shallow hazards, gas hydrates, HPHT conditions and low temperature rheology; together with practical solutions for each of them. As some of these challenges cannot be met by only fluids itself, technologies such as managed pressure drilling (MPD), dual-gradient drilling (DGD) and use of special downhole tools are also included in the discussions.
The project management aspect is covered for both the planning and execution phases. A newly developed Four Stage Planning Guideline (4SPG) with a recommended timetable is proposed for high-profile offshore drilling projects. Starting from fluids selection to preparation of the contingency plans is discussed in detail for the planning phase. Execution phase is discussed mainly for service company representatives on how to follow main or contingency plans effectively and ensure good communication is achieved with all parties involved.
Work model presented in this paper can be used as a complete guideline by operating and service company representatives in order to increase the success rate of these high-risk offshore drilling projects and ensure learnings are captured in a structured way for continuous improvement.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.