ÖzBu çalışmada otomotiv süspansiyon sistemi elemanı olan sac salıncak kollarınım üretiminde kullanılan DD13 ve S355MC kalite sacların, üretimde karşılaşılan yırtılma probleminin çözüm süreçleri araştırılmış ve problemin çözümü gerçekleştirilmiştir. Çalışmada Autoform yazılım programı yardımıyla gerçekleştirilen analiz çalışmalarında yırtılmaya maruz kalacak kritik bölgeler tespit edilerek, geometride bazı iyileştirmeler yapılmıştır. Çalışmanın sonraki aşamasında her iki malzeme için de yırtılmanın gözlendiği bölgede oluşan çentik etkisinin giderilmesi için parlatma işlemi yapılmıştır. Parlatma sonrasında DD13 için yırtılma probleminin boyun verme eğiliminde olduğu, S355MC malzemesinde ise yırtılma probleminin azaldığı gözlenmiştir. Bir sonraki aşamada, her iki malzemeye sürtünmeyi azaltmak için kalıp yağlayıcı teflon film kullanılmıştır. DD13 malzemesi için yırtılma problemi tamamen giderilirken, S355MC malzemesinde boyun verme ve yırtılma problemleri azda olsa devam etmektedir. Son aşamada yırtılma problemi giderilemeyen S355MC malzemesinin kritik bölgesine ısıl işlem uygulanmış ve yırtılma problemi giderilmiştir. Çalışmalara ek olarak elde edilen hatasız sac salıncak parçalara ±380 kgf yük altında 500.000 çevrim ile uygulanan yorulma testleri sonrasında parçalarda herhangi bir hasar gözlenmemiştir.
Different filler materials are widely used in industry both for obtaining better mechanical properties and decreasing the overall costs. In this study, several uniaxial tensile tests were conducted for 5.15% (MP 1 -GS 1 ), 9.4% (MP 2 -GS 2 ), and 13.4% (MP 3 -GS 3 ) of glass spheres and mica powder-filled elastomer materials. In this research, the results obtained from tensile tests of samples made of natural rubber/styrene-butadiene rubber (NR/SBR)-based elastomer materials in which different amount of glass spheres (GS) and mica powder (MP) mixed were characterized using the finite element method. The values of forces and displacements obtained from the tests were transferred to ABAQUS 6.7 finite element analysis (FEA) software. Among all hyperelastic material models, Marlow's model was found to be the most suitable one and was utilized as a material model in the FEA. Mechanical tests and the finite element results were compared with each other. Comparison of the results show that while the error percentage changed between 0.01 and 0.5% for the MP-filled samples, the error percentage changed between 0.25 and 0.5% for GS-filled samples. The effects of MP and GS filler materials on the mechanical properties of NR/SBR elastomer were compared. Maximum stress and strain values were observed in GS 2 and MP 2 materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.