The objective of this study was the evaluation of feasibility of producing particleboard for general use using cotton gin waste generated in Argentina and urea formaldehyde resin. The chemical composition and size distribution of particles of the ginning residue as well as mechanical and physical properties of the particleboards obtained were investigated. Density and flexural strength of particleboards produced with varying levels of urea-formaldehyde resin between 8.3 and 19.3% (solid to solid ratio) were evaluated. The effect of incorporating jute reinforcement on the mechanical properties of these boards was also analyzed. Particle boards with densities between 530 and 700 kg/m3 and variable flexural strength between 0.30 and 5.85 MPa were obtained, allowing the minimum levels required for low-density boards to be reached.
El objetivo de este estudio fue la evaluación de la factibilidad de producción de tableros de partículas para uso general utilizando residuos de desmote de algodón generados en Argentina y resina urea formaldehído. Se investigó la composición química y granulometría del residuo de desmote, así como propiedades mecánicas y físicas de los tableros de partículas obtenidos. Se evaluó la densidad y la resistencia a la flexión de los tableros de partículas producidos con niveles variables de resina urea formaldehído entre 8,3 y 19,3 % en relación sólido/sólido. También se analizó el efecto de la incorporación de refuerzo yute sobre las propiedades mecánicas de estos tableros. Se obtuvieron tableros de partículas con densidades entre 530 y 700 kg/m3 y resistencia a flexión variable entre 0,30 y 5,85 MPa, permitiendo alcanzar los mínimos niveles requeridos para tableros de baja densidad.
<p dir="ltr"><span>En la región algodonera argentina, el 30 % de las viviendas poseen cerramientos horizontales formados solo por chapas de acero galvanizado, sin ningún tipo de cielorraso, que redundan en disconfort, consumo excesivo de energía, condensación superficial, humedecimiento de la envolvente, crecimiento de hongos, desarrollo de afecciones crónicas e incremento de riesgos asociados una zona de alto riesgo por Mal de Chagas.</span></p><p dir="ltr"><span>Se propone emplear, como cielorrasos, tableros de partículas compuestas por residuos de desmonte y resina, brindando una alternativa para la disposición de aproximadamente 1.195.000 m</span><span><span>3</span></span><span> de residuos generados por campaña. Se evaluó la incorporación de tejido de yute bidireccional como refuerzo.</span></p><p dir="ltr"><span>Sobre los aglomerados se determinó la densidad, resistencia a flexión y conductividad térmica. </span></p><p dir="ltr"><span>Se realizaron cálculos de transmitancia térmica para diferentes tipologías constructivas comparando la capacidad de aislamiento térmico para condición de invierno y verano y se evaluaron diferentes alternativas de montaje.</span></p>
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.