Studi mengenai pengoperasian pembangkit listrik dari energi terbarukan dengan tenaga angin khususnya terkait dengan peran sistem kontrol pada pembangkit listrik tenaga angin relatif masih sangat terbatas. Peran sistem kontrol sendiri sangat penting di dalam konversi daya pembangkit listrik seperti ini. Oleh sebab itu untuk mengetahui serta menyelidiki pengaruh sistem kontrol konverter daya pada pembangkit listrik tenaga angin khususnya dengan Double-Fed Induction Generator (DFIG) dibutuhkan pemodelan dari pembangkit listrik tenaga angin dengan DFIG serta sistem kontrol yang dapat digunakan untuk simulasi pada jaringan atau sistem tenaga listrik. Penelitian dengan demikian bertujuan untuk menghasilkan model pembangkit listrik tenaga angin dengan generator DFIG beserta sistem kontrolnya yang dapat mengatur konversi daya secara optimal pada operasi yang terkoneksi ke jaringan listrik. Beberapa tahapan dilakukan pada penelitian ini yang terdiri dari kajian literatur, persiapan perangkat untuk simulasi memakai MATLAB/Simulink, pemodelan DFIG dengan penurunan persamaan yang berlaku, penyederhanaan model, disain kontrol, simulasi dan analisis. Pada tahapan penelitian ini hasil yang didapat merupakah sebagian tahapan penelitian yaitu mendapatkan pemodelan DFIG yang disederhanakan. Model DFIG yang disederhanakan ini diperoleh setelah melalui perumusan persamaan matematis dari rangkaian ekuivalen DFIG, menurunkan persamaan untuk model transien DFIG dan menyusun model DFIG dalam bentuk state space. Selanjutnya penyederhanaan dari bentuk state space diperoleh hubungan antara stator dan rotor DFIG.
The use of renewable energy (EBT) is increasing to achieve the target of 23% by 2025. There needs to be a variety of preparations in welcoming the transition of fossil-based energy to renewable energy. One of them is by improving the quality of human resources that excel in developing the use of renewable energy in Indonesia. Through the Electrical Engineering PkM Team IT-PLN had the opportunity to provide counseling or education to the academic community of MA Al-Khairiyah Rancaranji. The activity is in the form of learning the installation of solar power plant components and the utilization of solar energy in the form of prototype portable plts. The learning improved students' understanding of renewable energy and was able to assemble photovoltaic system components into prototype portable plts with a capacity of 100 WP. Then the tool is tested using a lamp load of 9 watts to find out the amount of current and voltage produced. From this activity, it can be known that the students of MA Al-Khairiyah Rancaranji are very enthusiastic in knowing about renewable energy and can apply it in the surrounding environment.
PLTS performances as a power plant does not only convert energy, so that electricity is generated, but in the study of power systems it becomes a major element that has an important role in the study of power systems. As a power system element, the PLTS acts as an element of electricity generation in this study modeled as a PV system and connected to the network, so it must meet the requirements of the electric power network operation. Through MATHLAB / SIMULINK modeling and simulation, a 100 kW peak PLTS power plant has been modeled connected to the network. From the simulation and analysis obtained, this PLTS model shows that the connected load affects the voltage condition but does not affect the frequency. The load power factor also affects the network, namely with a lower load power factor, it affects the voltage on the network. ABSTRAKKinerja PLTS sebagai pembangkit listrik tidak hanya melakukan konversi energi, sehingga yang dihasilkan tenaga listrik, tetapi dalam studi sistem tenaga menjadi elemen utama yang mempunyai peran penting dalam studi sistem tenaga. Sebagai elemen sistem tenaga maka PLTS berperan sebagai elemen pembangkit listrik yang di dalam studi ini dimodelkan sebagai sistem PLTS dan dikoneksikan ke jaringan, sehingga harus memenuhi persyaratan operasi jaringan tenaga listrik. Melalui pemodelan dan simulasi MATHLAB/SIMULINK telah dimodelkan pembangkit listrik PLTS berkapasitas 100 kW peak yang terhubung ke jaringan. Dari simulasi dan analisa yang didapat, model PLTS ini menunjukkan bahwa beban yang terhubung mempengaruhi pada kondisi tegangan tetapi tidak mempengaruhi frekuensi. Faktor daya bebanpun berpengaruh pada jaringan, yaitu dengan faktor daya beban yang makin rendah, maka berpengaruh kepada tegangan pada jaringan.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.