Seiring dengan pertumbuhan ekonomi yang tidak diikuti dengan pertumbuhan lapangan pekerjaan mendorong angka kiminalitas pun meningkat. Hal ini terlihat dengan maraknya pembobolan rumah dan semacamnya. Pada saat ini keamanan rumah masih menggunakan sistem penguncian manual yaitu dengan menggunakan kunci konvensional yang mudah digandakan. Oleh karena itu, dibutuhkan sistem keamanan rumah, dimana yang dapat mengakses dan membuka pintu tersebut hanya orang-orang tertentu saja. Penelitian ini bertujuan untuk membuat sebuah sistem pengaman pintu otomatis yang menggunakan e-KTP sebagai kuncinya. Alat ini mengunakan RFID reader RC522 yang berfungsi sebagai pembaca data e-KTP yang kemudian data tersebut diproses oleh ATmega328. Bila hasil pemrosesan data tersebut cocok, maka magnetic door lock akan diaktifkan melalui driver relay. Sistem pengaman ini dilengkapi dengan sensor magnetic MC 38 yang bekerja sebagai pendeteksi apabila pintu rumah dibuka secara paksa sehingga buzzer akan berbunyi sebagai tanda peringatan. Sistem pengaman pintu rumah tinggal ini memiliki kemampuan pembacaan modul RFID terhadap e-KTP dengan jarak maksimal sebesar 2.2 cm. Modul RFID reader tidak akan bisa bekerja bila dihalangi material berbentuk logam. Apabila pintu dibuka secara paksa, maka sensor magnetic MC38 aktif dan menngaktifkan alarm berupa buzzer dan lampu.
Pada era pandemi saat ini perkembangan teknologi sangat dibutuhkan pada bidang telekomunikasi. Hal ini terjadi karena adanya social distancing, adanya kondisi yang diharuskan untuk tidak menyentuh barang – barang yang ada disekitar untuk kesehatan kita sehingga kemudahan untuk berkomunikasi secara wireless dimanapun dan kapanpun sudah menjadi faktor utama bagi konsumen pengguna jasa telekomunikasi, begitu juga dengan kualitas dalam penggunaannya Hampir semua hal dilakukan atau dikerjakan melalui internet bahkan sistem pembelajaran Sekolah Dasar hingga Perguruan Tinggi dilakukan dengan sistem pembelajaran online atau daring, sehingga komunikasi data dilakukan hampir setiap saat dan setiap tempat. Wi-Fi (Wireless Fidelity) hampir digunakan disetiap gedung, pertokoan, hunian dan sebagainya.. Light Fidelity atau Li-Fi merupakan teknologi terbaru yang akan menggantikan Wi-Fi (Wireless Fidelity). Teknologi ini disebut VLC (Visible Light Communication) yaitu sistem komunikasi nirkabel yang menyampaikan informasi dengan memodulasi cahaya yang terlihat oleh mata manusia. Secara teoritis cahaya lampu dari jenis LED (Light Emitting Dioda) bisa digunakan sebagai media transmisi untuk kecepatan tinggi. Sementara itu pengunaan LED saat ini hanya diaplikasikan sebagai lampu penerangan. Metode yang digunakan dalam penelitian ini adalah metode penelitian eksperimental. Sistem kendali alat transmisi pada penelitian ini dirancang menggunakan Arduino sebagai pusat kendali dari sistem. Dari Hasil pengujian LED RGB yang digunakan pada sistem ini dengan jarak 60 cm sebanyak 20 buah dapat bekerja sesuai yang dibutuhkan. Pada pengujian komunikasi membutuhkan waktu kurang dari 1 detik. Dalam pengiriman sinyal pada prototipe ini terdapat bit error rate sistem sebesar 25% hingga 75%, namun tidak mempengaruhi proses lainnya.
Abstrak— Sistem monitoring adahlah sistem yang digunakan untuk memantau dan melaporkan hasil dari suatu sistem mesin produksi, apabila sistem monitoring dilakukan dengan cara manual seperti mencatat hasil dari produksi yang kemudian akan dilaporkan ke atasan atau penanggung jawab di produksi yang kemudian baru akan diteruskan kepada pihak kantor yang akan merubahnya ke dalam komputer, proses ini tentu nya akan memakan waktu yang lama, oleh karena itu digunakannya sistem monitoring otomatis untuk dapat memudahkan monitoring dan melaporkan hasil dari suatu sistem mesin produksi. Untuk dapat membuat sistem tersebut digunakan PLC dan HMI, PLC digunakan untuk menarik informasi dari suatu mesin melalui sensor atau tombol perintah untuk membaca atau menarik informasi kemudian PLC akan mengirim hasil data kepada HMI untuk dapat disimpan dan ditampilkan melalui laptop dan handphone android. Setelah perancangan sistem monitoring didapatkan hasil pengujian penelitian sistem monitoring dapat memonitoring hasil dari mesin produksi melalui laptop dan handphone android, waktu rata rata yang dibutuhkan untuk dapat mendapat data hasil produksi hingga termonitoring ke pengguna adalah 11,6 milisecond dan 13,8 milisecond yang di ukur menggunakan stopwatch milisecond, akurasi dari hasil monitoring pun akurat 100% dengan pengambilan sampel 10 data tanpa terdapat kesalahan satu pun.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.