Abstrak-- Pengukuran volume berperan penting dalam menjaga mutu dari produk yang dihasilkan. Salah satu alat ukur volume yang banyak digunakan adalah burette. Sesuai dengan standar ISO/IEC 17025:2017 laboratorium pengujian dan kalibrasi perlu melakukan pengecekan antara peralatan standar untuk menjamin status peralatan yang digunakan. Cek antara dilakukan dengan membandingkan berat isi yaitu berat cairan dalam gelas penampung yang dikeluarkan oleh valve burette dengan pembacaan standar electronic analytical balance ketelitian 0,0001 g. Data yang diambil sebanyak 5 kali selama 20 hari di awal dan di akhir untuk mendapatkan data perbandingan awal dan akhir yang akan digunakan untuk mendapatkan nilai Fhitung yang kemudian dibandingkan dengan nilai Ftabel pada metode uji F. Dari data awal didapatkan nilai µawal = 46,69108 g dan nilai σawal = 0,000109. Dan dari data akhir didapatkan nilai µakhir = 46,69110 g dan nilai σakhir = 0,000065. Dari data σawal dan σakhir didapatkan nilai Fhitung = 2,80, sedangkan nilai Ftabel dari tabel F yaitu 3,18. Karena data Fhitung ≤ Ftabel maka alat ukur burette dinyatakan masih baik pada titik ukur 10 mL. Dari control chart didapatkan nilai rata-rata masih berada pada wilayah UWL dan LWL sehingga alat ukur burette dinyatakan masih baik pada titik ukur tersebut. Kata Kunci : Cek Antara, Burette, Uji F, Control Chart.
Abstrak-- Salah satu standar panjang yang ada di laboratorium kalibrasi adalah ruler calibrator yang digunakan untuk mengkalibrasi alat ukur besaran panjang konvensional yaitu berupa batangan maupun pita panjang berskala umumnya terbuat dari bahan plastik, logam baja atau kuningan. Sesuai dengan standar ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories klausul 6.4 bahwa “pengecekan antara (intermediate check)” harus dilakukan sesuai prosedur tertentu bila diperlukan untuk menjamin kepercayaan terhadap unjuk kerjanya sehingga laboratorium kalibrasi perlu melakukan pengecekan antara peralatan standar untuk menjamin status peralatan yang digunakan. Penelitian ini akan membahas cek antara ruler calibrator untuk jaminan mutu internal kalibrasi. Ruler calibrator memiliki ketelitian 0,005 mm dengan kapasitas 2000 mm akan dilakukan cek antara menggunakan artefak steel ruler pada panjang 100 mm. Pengulangan pengambilan data sebanyak 5 kali selama 20 hari dengan data 10 hari di awal dan 10 hari di akhir. Hal tersebut dilakukan untuk mendapatkan Fhitung perbandingan awal dan akhir dan Ftabel metode uji F. Dari data pengukuran didapatkan nilai µawal = 100,0059 mm dan nilai σawal = 0,006488, serta nilai µakhir = 100,0060 mm dan nilai σakhir = 0,006182. Dari data σawal dan σakhir didapatkan nilai Fhitung = 1,10, sedangkan nilai Ftabel dari tabel F yaitu 3,18. Karena data Fhitung ≤ Ftabel maka alat ukur ruler calibrator dinyatakan masih baik pada titik ukur 100 mm. Dari data tersebut didapatkan Control Chart yang dapat diambil kesimpulan bahwa bahwa nilai rata-rata masih berada di bawah batas UWL dan LWL sehingga alat ukur ruler calibrator dinyatakan masih baik pada titik ukur tersebut. Kata Kunci : Cek Antara, Ruler Calibrator, Uji F, Control Chart
Abstrak-- Berdasarkan standar ISO/IEC 17025:2017 laboratorium pengujian dan kalibrasi perlu melakukan pengecekan antara peralatan standar untuk menjamin status peralatan yang digunakan. Penelitian ini membahas jaminan mutu internal hasil kalibrasi pressure gauge melalui cek antara yang wajib dilakukan oleh labroratorium. Pengambilan data dilakukan dengan pengulangan sebanyak 5 kali selama 10 hari di antara selang waktu interval kalibrasi. Penelitian ini mengambil data sebanyak 20 hari di awal dan di akhir untuk mendapatkan nilai Fhitung yang akan dibandingkan dengan nilai Ftabel metode uji F. Dari data awal didapatkan nilai µawal = 10,005 kgf/cm2 dan nilai σawal = 0,004137. Dari data akhir didapatkan nilai µakhir = 10,010 kgf/cm2 dan nilai σakhir = 0,004789. Dari data σawal dan σakhir didapatkan nilai Fhitung = 0,75, sedangkan nilai Ftabel dari tabel F yaitu 3,18 untuk total 100 data pada k = 2. Karena nilai Fhitung ≤ Ftabel maka alat ukur pressure gauge digital dinyatakan masih baik pada titik ukur 10 kgf/cm2. Dari evaluasi ketidakpastian didapatkan nilai U95 yaitu ± 0,0093 kgf/cm2 sehingga nilai rata-rata data akhir dan data awal 10,008 ± 0,0093 kgf/cm2 masih masuk dalam area keberterimaan pada titik ukur tersebut. Kata Kunci : Cek Antara, Pressure Gauge, Uji F, Control Chart, Ketidakpastian.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.