Caracterización mecánica de la madera aserrada de uso estructural, clasificada visualmente de acuerdo con la norma UNE 56544
Mechanical characterization of sawn timber for structural use^ graded visually in accordance withSpanish standard UNE 56544
INTRODUCCIÓNHasta recientes fechas, el cálculo de las estructuras de madera se efectuaba considerando las tensiones básicas del material, calculadas mediante ensayos con probetas ideales, de pequeño tamaño y libres de defectos, a las que, posteriormente, se afectaban coeficientes correctores por los defectos presentes en las piezas de tamaño real. Esta forma de proceder, mucho más lógica en el pasado, cuando era posible disponer de cantidades apreciables de madera casi totalmente limpia, sin estar totalmente eliminada en la actualidad como posible sistema de cálculo, ha sido relegada a un segundo término con la aparición del Eurocódigo 5 y del método en él propugnado: el de los elementos finitos.Los detractores del empleo constructivo de la madera, aparte de una serie de ideas más o menos veraces sobre el comportamiento de este material en servicio, que el tiempo y la actual tecnología han permitido confirmar su no vigencia en el tiempo presente, siempre han aducido, y con razón, que el empleo de la madera en construcción adolecía de falta de normas que dieran seguridad al calculista, al prescriptor y al usuario.Próximamente se asistirá a un relanzamiento de este material en construcción en España, ya que, por un lado, una Norma Básica de la Edificación (NBE) sobre estructuras de madera está en avanzada fase de elaboración, lo que ha de dar seguridad al prescriptor y, por otro, durante los últimos 12 años se han finalizado una serie de trabajos y proyectos de investigación que han permitido conocer, con gran precisión, los valores característicos de resistencia y rigidez aplicables para el cálculo de estructuras con maderas españolas, lo que no era posible hasta el momento.Por otra parte, hay que citar el trabajo normativo a nivel europeo del Comité CEN TC 124 "Estructuras de madera", que abarca desde la normalización de los métodos de ensayo de estructuras de madera y madera laminada, de postes, de tabiques, de uniones, etc. hasta la especificación de los requisitos de fabricación de la madera laminada o los de comprobación de las dimensiones de la madera a su recepción en obra. A nivel español, es necesario citar la reciente aparición de la norma UNE 56544 sobre "Clasificación visual de la madera aserrada con destino estructural", que permitirá establecer las combinaciones de especie y calidad y las especificaciones cualitativas y de propiedades aplicables a cada una de ellas.Estamos, pues, en la fase final de un ambicioso proceso normativo, cuya finalidad es dar seguridad al usuario, al prescriptor y al calculista y que impulsará el interés por un material injustamente olvidado y, frecuentemente, muy maltratado.
INTRODUCTION