The Valhall and Hod chalk fields have seen the rise of single-trip multistage fracturing (STMF) that allows stimulating two to four zones in a single day in contrast to the average of one zone every 2 to 3 days for conventional applications. Recent advancements focus on lowering operational costs while bringing wells on production faster. One way of doing this is to further improve the STMF method by the introduction of fracturing through coiled tubing (FTCT). Conventional multistage fracturing operations use the plug-and-perforation method to complete each stage separately. With a sliding sleeve completion, coiled tubing (CT) is used to manipulate sleeves; then, proppants are pumped down the wellbore without CT in the well. Conversely, STMF uses a bottomhole assembly (BHA) with sleeve shifting tool and multiset packer for selective proppant stimulation down the CT-tubing annulus. Any underflush of proppants is cleaned by CT forward circulation. FTCT builds upon the STMF method, but proppants are pumped through CT. The underflush proppants are reverse circulated out of CT through a BHA without a check valve. FTCT was first used in a well at 5,000-m measured depth (MD) using a 6,700-m 2 7/8-in. CT. Data from this operation were used to match the friction calculation. In the second well at 6,500-m MD, intervened with a 7,400-m-long CT, 10 zones were stimulated using FTCT, and 2 zones with conventional fracturing. FTCT only required 8.5 hours whereas conventional fracturing took 75.6 hours per zone. The underflush volume was 50% less and removed through reverse cleanout that is 4 hours faster per stage compared to STMF. In the third well at 6,700-m MD, the well was killed with 1.35-SG heavy brine due to a leak in the completion. Proppant was pumped through CT and displaced with 1.04-SG brine. An increase in pumping pressure during reverse cleanout, compounded with the difference of fluid density, led to the collapse of CT section above the BHA. The collapse created difficulties for the BHA to unset, thus creating a mechanical sticking point, and hindered the ball drop release mechanism for the BHA. Awareness of pressure limitations of CT at the thinnest section is essential to improve the reverse cleanout design since high initial forces are required to reverse circulate. FTCT requires careful pressure analysis, especially when attempting operations in deep horizontal wells. Most standard CT cleanout simulation software lacks complete hydraulic modeling capabilities for reverse cleanout of crosslinked fluids with proppants. Data gathered from the three operations are thus important to improve the method. This study highlights associated challenges, considerations during design, operational benchmarks, and learnings from the world's longest FTCT operation in the North Sea.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.