PLTMH Rimba Lestari kapasitas 18 KW terletak di Dusun Tangsi Jaya, Desa Gunung Halu, Kecamatan Gunung Halu, Kabupaten Bandung Barat, Provinsi Jawa Barat perlu dijaga untuk dapat tetap beroperasi dengan sehat guna memasok keperluan daya listrik warga masyarakat sekitar. Untuk itu diperlukan para operator mandiri yang memiliki pengetahuan dan keterampilan secara memadai. Oleh karena itu, pelatihan bagi operatornya merupakan langkah yang tepat untuk dilakukan. Paper ini dimaksudkan untuk melakukan kajian terhadap program pelatihan bagi para operator PLTMH yang dimulai dari survey penjajagan, penyusunan silabus dan metode pelaksanaannya hingga pengukuran efektivitas pelatihan yang dilaksanakan. Materi pelatihan meliputi teori dan praktek dengan instruktur yang berpengalaman sesuai dengan substansi yang dilatihkan. Dengan materi dan metode yang diterapkan Pelatihan dapat berjalan denganlancar dan berhasil dengan baik. Dengan melihat latar belakang masalah peserta didik yang beragam dari tingkat pendidikan maupun pola pikir, perlu adanya pendekatan metoda dan materi yang tepat untuk melaksanakan kegiatan pelatihan ini. Keberhasilan ini ditunjukkan oleh partisipasi aktif dan semangat tinggi para peserta selama mengikuti pelatihan serta tingginya tingkat serapan terhadap materi/substansi pelatihan, yaitu meningkatnya pengetahuan dan keterampilan dalam mengoperasikan pembangkit dengan baik yang ditunjukkan dengan tingginya nilai hasil uji akhir (posttest). Selain itu, paper ini juga bisa digunakan sebagai rujukan bagi para pihak yang akan melakukan kegiatan serupa atau lainnya yang terkait dengan PLTMH. Kata kunci: Operator, materi, metode dan sistem pendekatan.
Geothermal is one of the most significant natural resource potentials in Indonesia. One power plant that utilises geothermal steam as its energy source is PLTP. Geothermal steam that has passed through the geothermal power plant separator to move the turbine while the residual waste (brine) with a high enough temperature has the potential to be a source of heating to produce electrical energy in the Kalina cycle generator. Using brine, before entering the turbine, it must first become airtight in the evaporator. Evaporator design requires initial parameters namely brine fluid flow rate and ammonia-water flow rate, shell dimensions and tube dimensions as well as the number of passes, then performs the design calculation steps until the calculation results meet operating requirements, namely the pressure drop value and the dirt factor. Different variations of brine rate will produce different pressure drops and soil factors. Brine rate variations are 11 kg/s, 22 kg/s, 33 kg/s, 44 kg/s, 55 kg/s and 66 kg/s show the lowest pressure drop of 0.098 bar and the most massive 0.68 bar, and the smallest dirt factor is 0,002 (hr)(m2 °C)/Joule moreover, the largest is 0,00019 (hr)( m2 °C)/Joule.
Nowadays, there are still many high capacity generators have not yet protected completely from their internal ground faults. They still rely on differential and over current relays. It is seen that this relay will reduce their sensitivities when applied to generators with high impedance grounding systems. To overcome such problem, a combination protection scheme of the neutral overvoltage (59N) and neutral undervoltage third harmonics (27N3) is developed. This paper aims to design the protection scheme for high capacity generators. This paper demonstrates the designing of neutral grounding transformer (NGT) system, the relay settings and reviewing of their sensitivities. To clarify the concepts this study uses a generator 802 MVA, 22.8 kV as object. The results show that the protection scheme is very effective to protect 100% of generator stator with relays overlapping of 31.5%. It needs NGT transformer with capacity of only 28.33 kVA, 15000/240 V, and the secondary resistor of 0.38,117 kW. This paper can hopefully be used as one reference for protection system engineers to design or develop protection schemes in their fields especially whose generator has not equipped yet with such protection scheme.
Pembangkit listrik tenaga Bayu (PLTB) merupakan salah satu pembangkit listrik energi terbarukan yang menjadi pilihan dalam program transisi energi nasional Indonesia menuju net-zero emission pada tahun 2060 (Paris Agreement 2015). Pembangkit ini untuk mendapatkan energi listriknya dilakukan dengan cara mengkonversi energi angin menjadi energi listrik. Pada proses konversi ini banyak menggunakan generator magnet permanen sehingga tegangan keluaran bevariasi sebanding dengan kecepatan angin yang berubah-ubah sehingga tidak sesuai dengan kebutuhan beban yang menghendaki tegangan konstan. Paper ini menyajikan stabilisasi tegangan tersebut dengan memanfaatkan teknologi konverter topologi Buck Boost Converter dengan kontrol berbasis Arduino Uno. Berdasarkan hasil pengujian yang dilakukan di laboratorium dengan menggunakan power supply variable, converter berfungsi dengan baik, yaitu mampu menghasilkan tegangan keluaran DC konstan sebesar 12 V DC sesuai setting yang telah ditentukan walaupun diberikan tegangan masukan yang berubah-ubah sebagaimana yang terjadi pada PLTB. Ini menunjukkan bahwa konverter yang diusulkan ini cocok untuk dipasang pada keluaran PLTB untuk mendapatkan tegangan keluaran yang konstan.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.