Bismuth oxide (Bi2O3) decorated titania nanotube array (T-NT) composite materials were synthesized by a simple, yet versatile electrodeposition method. The effects of deposition current density and time on morphology evolution of the bismuth oxide phase were analyzed. It was found that an optimum deposition condition in terms of current density and time could be reached to achieve uniform and equiaxed crystal morphology of the deposited oxide phase. The morphology, shape, size distribution, and crystal structure of the bismuth oxide phase were evaluated using scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopic techniques. The electrochemical capacitance of the T-NT/Bi2O3 composites was studied by conducting cyclic voltammetry and galvanostatic charge-discharge experiments. These studies indicated that the capacitance behavior of the composite material was dependent on the morphology and distribution of the bismuth oxide phase. The capacitance was greatly enhanced for the composite having equiaxed and uniformly distributed bismuth oxide particles. The maximum interfacial capacitance achieved in this study was approximately 430 mF cm(-2). Galvanostatic charge-discharge experiments conducted on the composite materials suggested stable capacitance behavior together with excellent capacitance retention even after 500 cycles of continuous charge-discharge operation.

A facile electrochemical technique has been employed to fabricate titania nanotube (T-NT)/cobalt sulfide (CoS) composite electrode for high performance supercapacitor application. The morphology and phase evaluation of the electrode were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques. The pseudocapacitance behavior of the T-NT/CoS composite electrode has been evaluated in four different aqueous electrolytes: KOH, KCl, Na 2 SO 4 and Na 2 SO 3. Cyclic voltammetric studies in aqueous KOH electrolyte indicated that a very high specific capacitance (370 F g-1) can be achieved in this electrolyte together with excellent cycle stability even after 300 consecutive CV cycles. Further, the capacitance behavior of the T-NT/CoS electrode in KCl, Na 2 SO 4 , and Na 2 SO 3 electrolytes exhibited a mixture of electric double layer (EDL) and redoxinduced supercapacitance as displayed in the cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopic (EIS) experiments. It was also observed that the capacitance behavior of the composite material is not greatly dependent on the electrolyte used

The article demonstrates the influence of annealing temperature on the supercapacitance behavior of iron oxide nanotube synthesized on pure iron substrate by electrochemical anodization process. Anodization was performed in an ethylene glycol solution containing 3% H 2 O and 0.5 wt. % NH 4 F. The as-anodized nanotubes were annealed in an ambient atmosphere at various temperatures ranging from 200 to 700ºC for a fixed duration of time (2hrs). The morphology and crystal phases developed after anodization and subsequent annealing processes were examined using field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD) and X-ray photospectroscopy (XPS). Cyclic voltammetry (CV), galvanostatic charge/discharge and electrochemical impedance spectroscopy (EIS) experiments were performed in 1 M Li 2 SO 4 to evaluate the electrochemical capacitance properties of the oxide nanotube electrodes. It was found that the electrode annealed at 300°C exhibited superior electrochemical capacitance compared to the electrodes annealed at other temperatures. The highest specific capacitance achieved after annealing at 300°C was about 314 mF cm-2. The

The effect of annealing atmosphere on the supercapacitance behavior of iron oxide nanotube (Fe-NT) electrodes has been explored and reported here. Iron oxide nanotubes were synthesized on a pure iron substrate through an electrochemical anodization process in an ethylene glycol solution containing 3% H2O and 0.5 wt.% NH4F. Subsequently, the annealing of the nanotubes was carried out at 500 °C for 2 h in various gas atmospheres such as air, oxygen (O2), nitrogen (N2), and argon (Ar). The morphology and crystal phases evolved after the annealing processes were examined via field emission scanning electron microscopy, x-ray diffraction, Raman spectroscopy, and x-ray photoelectron spectroscopy. The electrochemical capacitance properties of the annealed Fe-NT electrodes were evaluated by conducting cyclic voltammetry (CV), galvanostatic charge-discharge, and electrochemical impedance spectroscopy tests in the Li2SO4 electrolyte. Based on these experiments, it was found that the capacitance of the Fe-NT electrodes annealed in air and O2 atmospheres shows mixed behavior comprising both the electric double layer and pseudocapacitance. However, annealing in N2 and Ar environments resulted in well-defined redox peaks in the CV profiles of the Fe-NT electrodes, which are therefore attributed to the relatively higher pseudonature of the capacitance in these electrodes. Based on the galvanostatic charge-discharge studies, the specific capacitance achieved in the Fe-NT electrode after annealing in Ar was about 300 mF cm(-2), which was about twice the value obtained for N2-annealed Fe-NTs and three times higher than those annealed in air and O2. The experiments also demonstrated excellent cycle stability for the Fe-NT electrodes with 83%-85% capacitance retention, even after many charge-discharge cycles, irrespective of the gas atmospheres used during annealing. The increase in the specific capacitance was discussed in terms of increased oxygen vacancies as a result of the enhanced transformation of the hematite (α-Fe2O3) phase to the magnetite (Fe3O4) phase for the electrodes annealed in the N2 and Ar atmospheres.

No abstract