Polypropylene (PP)/poly(lactic acid) (PLA)/clay nanocomposite films with various compositions (PP‐rich and PLA‐rich) were prepared. Their structural and barrier properties against CO2, O2, and N2 were investigated. The microstructure of the nanocomposites was studied by scanning electron microscopy, transmission electron microscopy, and wide angle X‐ray scattering. The PP‐rich with 75/25 composition revealed the best barrier properties against all the gases which could be justified according to its microstructure. Selectivity of O2/N2 and CO2/N2 was also measured. It was found that the addition of nanoclay as a gas barrier component reduced the permeability in both systems. The permselectivity was also reduced in the PP‐rich films while it was increased in the PLA‐rich system. Moreover, the temperature dependency of permeability, selectivity, and permselectivity for PP, PLA, and PP/PLA (75/25) samples was examined. The results showed that the temperature dependence of permeability obeyed an Arrhenius equation and order of activation energy of permeability for O2, CO2, and N2 gases was found to be EP < EP/PLA < EPLA. According to solubility measurements, the order of solubility coefficient for gases was as follows: CO2 > O2 > N2. Finally, the molecular dynamics (MD) simulation was performed to estimate the diffusivity coefficients of the gases and showed that solubility increases with increasing temperature, which was in accordance with the experiments. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018, 135, 46665.

No abstract

No abstract

No abstract