No abstract

p‐Nitrophenol (p−NP) is a high priority toxic pollutant and that has harmful effects on human, animals and plants. Thus, the detection and determination of p−NP present in the environment is an urgent as well as highly important requisite. The present article, therefore focused on the construction of a novel electrochemical sensor based on NiO nanoparticles/α‐cyclodextrin functionalized reduced graphene oxide modified glassy carbon electrode (NiO−NPs‐α‐CD‐rGO‐GCE) for the selective and sensitive detection of p−NP. UV‐vis, high resolution transmission electron microscopy (HR‐TEM), selected area electron diffraction pattern (SAED) and X‐ray diffraction (XRD) analysis confirms the formation of highly pure NiO nanoparticles. Field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray spectroscopy (EDS), and cyclic voltammetry (CV) were used to characterize the step‐wise electrode modification process. DPV was carried out to quantify p−NP within the concentration range of 1−10 μM and found the detection limit of 0.12 nM on the basis of the signal‐to‐noise ratio S/N=3. The electrode can able to detect different isomers of nitrophenols. Interferences of other pollutants such as phenol, p‐aminophenol, o‐ and m‐ nitrophenol, 4‐chlorophenol, 2,6‐dichlorophenol and ions like K+, Cd2+, Cl−, SO42− did not affect the sensing of p−NP. The newly developed sensor exhibited diffusion controlled kinetics and had excellent sensitivity, selectivity and reproducibility for the detection of p−NP. The electrode showed good recoveries in real sample analysis.

Polyoxometalate nanoparticles, [H3PMo12O40]NPs, modified gold electrode showed excellent electrocatalytic activity towards water oxidation reaction at an overpotential of 350 mV with a current density of 1.7 mA cm−2 in neutral pH medium.

Catalytic oxidation of water by manganese complexes is of great interest because it can serve as a model for the natural oxygen evolving complex, Mn4CaO5. Complex compounds are highly active and tunable, but their limited stability and solubility restrict them for practical water oxidation applications. In the present article we have prepared surface anchored Mn(II)‐complexes, [MnII(H2O)2(X)2(dcbpy)] (where dcbpy= 4,4′‐dicarboxy‐2,2′‐bipyridine; X=acetate, sulphate, chloride ions) on gold electrode surface using self‐assembly process and applied for the electrocatalytic oxidation of water in neutral pH. The modified electrode was characterized by using different spectral, microscopic and electrochemical techniques. The Mn(II)‐acetate containing gold electrode (Mn(II)‐dcbpy‐Au) electrocatalytically oxidized water at a current density of 1.6 mA cm−2 with low overpotential ∼ 310 mV and a Tafel slope of 56 mV/decade. The modified electrode showed high electrochemical stability during controlled potential electrolysis. It was also observed that the Mn(II)‐acetate immobilized on dcbpy‐Au electrode showed higher electrocatalytic activity in oxidation of water than Mn(II)‐chloride or Mn(II)‐sulfate containing dcbpy‐Au electrode. The newly in‐situ generated Mn(II)‐complex modified electrode is inexpensive and highly efficient for the catalytic oxidation of water than the surface bound Mn‐based electrocatalysts reported previously.