Energy objects, installations of high and ultra-high voltage, are considered man-made, dangerous objects in terms of the intensity of the electric and magnetic field distribution, which create ion shells in high-altitude zones and spread a certain radius on the territory of a residential area. In this regard, during the construction and commissioning of low-frequency power facilities, it is necessary to conduct a specific environmental analysis on the selected territory. One of the main sanitary and epidemiological requirements for the construction and commissioning of high – voltage power lines is to take into account changes in the daily and seasonal distribution of electrical loads along high-voltage power lines, which have a continuous dynamic characteristic that increases the level of electric and magnetic field strength. In turn, the development of information support for environmental problems of the territory based on GIS technologies makes it possible to record information about the ecological state of the territory at a specific time and present this state with a set of thematic environmental maps of various territorial or district entities. It should be noted that the above characteristics increase the advantage of geoinformation technologies as an information platform of the database, which will make it possible to obtain data for processing operational analyses and conclusions about the state of the environment around high-voltage power lines.
We have previously reported the isolation of carbohydrates, alcohols, and acids from E. lamprocarpa Benth. [1].In this paper we give the results of a study of the triterpene compounds from E. jaxartica I)rokh.The eomminuted raw material was extracted with chloroform. The chloroform was distilled off and the residue was dissolved in acetone. The aeetone-spluble fraction was treated with petroleum ether and chromatographed on alumina. Elution was then carried out successively with petroleum ether, benzene, acetone, and methanol. A mixture with an authentic sample of euphol gave no depression of the melting point and their IR spectra were identical.The second ethereal eluate and the acetone eluate yielded crystals with the composition C~lH~zO , mp 126-127 ° C, [oz]~ ±0% The substance formed anO-acetyl derivative with mp 126 ° C. The properties of this substance were identical with those of euphorbol, also isolated from spurge [4]. A mixture of the substance that we had obtained with euphorbol gave no depression of the melting point, and their IR spectra were identical.
This paper presents a technology for applying copper and silver films to cotton fabrics by combining photochemical and chemical methods for the reduction of the compounds of these metals. The resulting metal-containing films have inherent electrical conductivity of metals. All the main processes described in the work were carried out by means of the compounds being sorbed by the surface of the fabric when they were wetted in appropriate solutions. The aim of the work was to study the application of electrically conductive composite copper films on cotton fabrics. The tasks to achieve this aim were to perform scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction analysis to confirm that as a result of the experiment, CuCl with a semiconductor ability was formed on the surface of the sample. The driving force behind the photochemical reduction of copper and silver halides on cotton surfaces is that, as a result of the photooxidation of cellulose molecules in the fabric, copper monochloride is first formed on the cotton surface. Subsequently, the process of obtaining silver particles based on semiconductor silver chloride obtained as a result of the transformation of copper monochloride was carried out. The physicochemical and photochemical processes leading to the formation of monovalent copper chloride, which provides sufficient adhesion to the substrate, are considered. It is shown that in this case, the oxidation of monovalent copper also occurs with the formation of soluble salts that are easily removed by washing. Since the proposed technology does not require special equipment, and the chemical reagents used are not scarce, it can be used to apply bactericidal silver films to various household items and medical applications in ordinary laundries or at home. This article examines an affordable and simple technology for producing metal films on a cotton surface due to the presence of disadvantages (time duration, high temperature, scarce reagents, special installations, etc.) of a number of well-known methods in the production of chemical coatings.
Nowadays, one of the key issues in the ecological field and environmental protection is the influence of the electromagnetic field distribution intensity generated by low-frequency energy objects on the urban system. The purpose of environmental monitoring is to establish sanitary protection zones, taking into account the necessary maximum permissible conditions, during the construction and commissioning of new energy facilities. The agglomeration environment of the Shymkent city in the Republic of Kazakhstan where there is an increased electromagnetic pollution propagation generated by 110 and 220 kV high-voltage lines has been taken as the object under study. At the initial stage, the geometric parameters of power transmission lines have been determined by ground-based laser scanning and were later used in the main calculations to determine the electric and magnetic field distribution intensity. The mirror image method has been used to determine the electric and magnetic field levels in high-voltage transmission lines. As a result of the calculations obtained a geoinformation map was constructed based on the gradient of electric and magnetic fields in the studied territories using the inversely weighted distance method with the use of the ESRI ARC Gis application program. A three-dimensional characteristic is constructed that visually shows the dependence of the time spent by people in the zone of electromagnetic radiation, which depends on the radiated object. This characteristic is a sanitary protection zone that restricts the routing of line workers.
We have studied the epigeal part of E. lamprocarpa Prokh., family Euphorbiaeeae collected in the Syr'dar'ya region in the flowering period. The comminuted plant material was extracted with chloroform. The yield of extractive substances was 7.71%;, of them, the acetone-soluble fraction amounted to 5.88% and the acetone-insoluble fraction to 1.83%. The acetone-soluble fraction was treated with petroleum ether (bp 40-60 ° C) with heating. The fraction soluble in petroleum ether was passed through alumina. From the first fraction was isolated a hydrocarbon, octacosane [1], and from the second and third fractions triacontane [2]. Then the column was eluted successively with benzene, acetone, and methanol. The benzene fraction yielded an alcohol (hexacosanol [3]) and the acetone and methanol eluted triacontanol E4]. These substances were identified by mixed melting points and IR spectra with authentic samples. This is the first time these hydrocarbons and alcohols have been isolated from plants of the genus Euphorbia.
The growing energy demand of the city of Shymkent has led to the construction and introduction of new energy hubs, high-voltage power lines, which are being built and conducted around residential areas exposed to environmental and carcinogenic risks. In turn, when constructing new energy facilities, energy companies and designers should present a cartography of residential areas in the project, in addition to the features of the selected territories and the population, which becomes a multi-factor object and subject of research when taking into account environmental and sanitary-epidemiological requirements, as well as when choosing optimal solutions in terms of routing high-voltage power lines. In our case, the residential district of Nursat, Nazarbayev Avenue and Kazygurt were chosen as such objects, which are polluted residential areas from the point of view of the spread of electromagnetic radiation generated by high-voltage power lines with a voltage of 110 and 220 kV. The introduction of modern information technologies of a new generation made it possible to pinpoint and determine the main zones of electromagnetic radiation contamination, to establish the gradients of the electric and magnetic fields according to the degree of its impact, as well as to determine the number of residential objects that are partly exposed to carcinogenic and environmental risk by using the functional features of the geoinformation program.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.