Despite several excellent properties including low shrinkage, good chemical resistance, curable at low temperatures and the absence of byproducts or volatiles, epoxy resins are susceptible to ultra violet (UV) damage and their durability is reduced substantially when exposed to outdoor environments. To overcome this drawback, UV absorbers have been usually used to decrease the rate of UV degradation. In this present study, the effects of UV light on the chemical, mechanical and physical properties of cured epoxy structure, as well as the effect of an organic UV absorber, Tinuvin 1130, on the epoxy properties were investigated. Chemical changes in a cured epoxy system as a result of the presence and absence of Tinuvin 1130 were determined using Fourier transform infrared spectroscopy (FT-IR) analyses. The effect of Tinuvin 1130 on the surface morphology of the epoxy systems was also investigated by scanning electron microscopy (SEM) imaging. Additionally, the glass transition temperatures (T g ) before and during UV radiation were measured. After an 800 h UV radiation, mechanical test results revealed that the lack of the UV absorber can lead to a~30% reduction in tensile strength. However, in the presence of Tinuvin 1130, the tensile strength was reduced only by~11%. It was hypothesized that the use of Tinuvin 1130, as an organic UV absorber in the epoxy-amine system, could decrease the undesirable effects, arising from exposure to UV light.

No abstract

No abstract

The sodium alginate-g-poly(acrylic acid-co-acrylamide)/rice husk ash (NaAlg-g-P(AA-co-AAm)/RHA) superabsorbent nanocomposite was synthesized by the free-radical graft copolymerization of alginate (NaAlg), acrylic acid (AA), acrylamide (AAm), and RHA in aqueous solution. FTIR spectra revealed that the monomers were grafted onto NaAlg chains, and the nanocomposite was formed successfully. Incorporation of RHA into hydrogel matrix formed porous interlinked channels within hydrogel network. Superabsorbent nanocomposite showed greater equilibrium swelling capacity (1070g/g) compared with neat hydrogel (830g/g). Moreover, water transport mechanism of all hydrogels was non-Fickian diffusion type. Rheological measurements confirmed effective role of RHA in improving gel strength of superabsorbent nanocomposite. The influence of various factors, such as different loads (0.3, 0.6, 0.9 psi), solution pH, saline solution, and temperature on the swelling behavior of hydrogels was also assessed. Superabsorbent nanocomposite exhibited good pH-dependent swelling reversibility and high water retention capability, making it more efficient water-saving material for agricultural and horticultural applications.

No abstract